Section R392-302-27 - Dressing RoomsThe manager shall ensure that:
(1) each area and fixture within a dressing room is maintained in an operable, clean, and sanitary condition;(2) where dressing rooms are provided, the entrances and exits are designed to break the line of sight into the dressing areas from other locations;(3) each dressing room is constructed of materials that have smooth, non-slip surfaces, and are impervious to moisture;(4) dressing room floors slope to a drain and are constructed to prevent accumulation of water;(5) carpeting is not installed on dressing room floors;(6) each junction between walls and floors are coved;(7) the walls or partitions between dressing cubicles begin at a height not more than 12 inches from and extend not less than 60 inches above the finished floor surface or are placed on continuous raised masonry or concrete bases at least four inches high;(8) each locker is: (a) set on: (i) a solid masonry base no less than four inches high; or(ii) legs elevating the bottom locker at least four inches above the floor; and(b) equipped with louvers for ventilation; and(9) at least one covered waste receptacle is provided in each dressing room.Utah Admin. Code R392-302-27
Amended by Utah State Bulletin Number 2017-12, effective 6/1/2017Amended by Utah State Bulletin Number 2018-12, effective 5/24/2018Amended by Utah State Bulletin Number 2020-05, effective 2/26/2020Amended by Utah State Bulletin Number 2020-16, effective 8/10/2020Adopted by Utah State Bulletin Number 2023-17, effective 8/21/2023