Section R392-302-26 - Bather Load(1) The manager shall ensure that peak bather load, as described in Subsection (3), is not exceeded.(2) The manager shall ensure that a two-inch safety sign, as described in Subsection R392-302-32(1) with a heading containing a safety signal such as warning, caution, or attention is posted:(a) indicating the allowed peak bather load for each pool; and(b) within the pool enclosure.(3) The peak bather load shall be determined as follows:(a) ten square feet of pool water surface area per bather is provided in a spa pool;(b) 20 square feet of pool water surface area per bather is provided for each bather in:(iii) an instructional pool;(vi) an interactive water feature collection zone; or(c) 50 square feet of pool water surface area per bather is provided; (d) a manufacturer established capacity is followed in a surf pool.(4) The local health officer may approve a different peak bather load during the pool plan approval process as described in Section R392-302-5.Utah Admin. Code R392-302-26
Amended by Utah State Bulletin Number 2017-12, effective 6/1/2017Amended by Utah State Bulletin Number 2018-12, effective 5/24/2018Amended by Utah State Bulletin Number 2020-05, effective 2/26/2020Amended by Utah State Bulletin Number 2020-16, effective 8/10/2020Adopted by Utah State Bulletin Number 2023-17, effective 8/21/2023