S.D. Admin. R. 74:02:04:44
The driller shall be knowledgeable of heat of hydration and thermoplastic hydraulic collapse pressure limits listed in ASTM Standard F 480-90e and the "Manual on the Selection and Installation of Thermoplastic Water Well Casing," 1980. When using thermoplastic casing to construct a well, the driller shall install the thermoplastic casing in a manner that does not exceed the casing hydraulic collapse resistance.
S.D. Admin. R. 74:02:04:44
General Authority: SDCL 46-2-5, 46-6-20, 46-6-27.
Law Implemented: SDCL 46-6-10, 46-6-20, 46-6-27.
ASTM Standard F 480-90e, "Thermoplastic Water Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR)," July 27, 1990. Published by American Society for Testing and Materials, September 1990. Copies may be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103; Cost: $12. "Manual on the Selection and Installation of Thermoplastic Water Well Casing," 1980. Published by the National Water Well Association and the Plastic Pipe Institute, October 1, 1980. Copies may be obtained from the National Ground Water Association Bookstore, P.O. Box 182039, Dept. 017, Columbus, OH 43218-2039. Cost: $15.