Statutes, codes, and regulations
South Dakota Administrative Rules
Title 74 - Department of Environment And Natural ResourcesArticle 74:02 - Water rights
Chapter 74:02:04 - Well construction standards
Section 74:02:04:43 - Thermoplastic casing requirements

S.D. Admin. R. 74:02:04:43

Download
PDF
Current through Register Vol. 51, page 67, December 16, 2024
Section 74:02:04:43 - Thermoplastic casing requirements

All thermoplastic casing used for water well casing must meet or exceed ASTM Standard F 480-90e and NSF Standard 14 (1990). Thermoplastic well casing five inches in diameter or larger must have a minimum wall thickness of 0.250 inches.

S.D. Admin. R. 74:02:04:43

12 SDR 50, effective 9/29/1985; 13 SDR 129, 13 SDR 141, effective 7/1/1987; 18 SDR 224, effective 7/16/1992.

General Authority: SDCL 46-2-5, 46-6-20, 46-6-27.

Law Implemented: SDCL 46-6-10, 46-6-20, 46-6-27.

ASTM Standard F 480-90e, "Thermoplastic Water Well Casing Pipe and Couplings Made in Standard Dimension Ratios (SDR)," July 27, 1990. Published by American Society for Testing and Materials, September 1990. Copies may be obtained from the American Society for Testing and Materials, 1916 Race Street, Philadelphia, PA 19103. Cost: $12. NSF Standard 14 (1990), "Plastics, Piping Components and Related Materials."Published by the National Sanitation Foundation, November 1990. Copies may be obtained from the National Sanitation Foundation, P. O. Box 1468, Ann Arbor, Michigan 48106; Cost: $20.