S.D. Admin. R. 74:02:04:45

Current through Register Vol. 51, page 67, December 16, 2024
Section 74:02:04:45 - Solvent cementing procedures for thermoplastic connections

Solvent cementing procedures for thermoplastic casing connections shall be as recommended by the casing manufacturer or as stated in the "Manual on the Selection and Installation of Thermoplastic Water Well Casing," 1980. Set times for solvent joints may be shortened by using stainless steel screws in the joints provided the screws do not penetrate to the inside of the casing.

S.D. Admin. R. 74:02:04:45

12 SDR 50, effective 9/29/1985; 13 SDR 129, 13 SDR 141, effective 7/1/1987; 18 SDR 224, effective 7/16/1992.

General Authority: SDCL 46-2-5, 46-6-20, 46-6-27.

Law Implemented: SDCL 46-6-10, 46-6-20, 46-6-27.

"Manual on the Selection and Installation of Thermoplastic Water Well Casing," 1980. Published by the National Water Well Association and the Plastic Pipe Institute, October 1, 1980. Copies may be obtained from the National Ground Water Association Bookstore, P.O. Box 182039, Dept. 017, Columbus, OH 43218-2039. Cost: $15.