21 C.F.R. § 177.1210

Current through October 31, 2024
Section 177.1210 - Closures with sealing gaskets for food containers

Closures with sealing gaskets may be safely used on containers intended for use in producing, manufacturing, packing, processing, preparing, treating, packaging, transporting, or holding food in accordance with the following prescribed conditions:

(a) Closures for food containers are manufactured from substances generally recognized as safe for contact with food; substances that are subject to the provisions of prior sanctions; substances authorized by regulations in parts 174, 175, 176, 177, 178 and § 179.45 of this chapter; and closure-sealing gaskets, as further prescribed in this section.
(b) Closure-sealing gaskets and overall discs are formulated from substances identified in § 175.300(b) of this chapter, with the exception of paragraph (b)(3)(v), (xxxi), and (xxxii) of that section, and from other optional substances, including the following:
(1) Substances generally recognized as safe in food.
(2) Substances used in accordance with the provisions of a prior sanction or approval within the meaning of section 201(s) of the act.
(3) Substances that are the subject of regulations in parts 174, 175, 176, 177, 178 and § 179.45 of this chapter and used in accordance with the conditions prescribed.
(4) Substances identified in paragraph (b)(5) of this section, used in amounts not to exceed those required to accomplish the intended physical or technical effect and in conformance with any limitation provided; and further provided that any substance employed in the production of closure-sealing gasket compositions that is the subject of a regulation in parts 174, 175, 176, 177, 178 and § 179.45 of this chapter conforms with the identity or specifications prescribed.
(5) Substances that may be employed in the manufacture of closure-sealing gaskets include:

Table 1

List of substancesLimitations (expressed as percent by weight of closure-sealing gasket composition)
Arachidy-l-behenyl amide (C20-C22fatty acid amides)5 percent.
Azodicarbonamide1. 2 percent.
2. 5 percent; for use only in the manufacture of polyethylene complying with item 2.1 in § 177.1520(c) of this chapter.
Balata rubber
Benzyl alcohol1 percent.
Brominated isobutylene-isoprene copolymers, produced when isobutylene-isoprene copolymers complying with § 177.1420(a)(2) are modified by bromination with not more than 2.3 weight-percent of bromine and having a Mooney Viscosity (ML 1 + 8 (125 °C)) of 27 or higher. The viscosity is determined by the American Society for Testing and Materials (ASTM) method D 1646-81, "Standard Test Method for Rubber-Viscosity and Vulcanization Characteristics (Mooney Viscometer)," which is incorporated by reference in accordance with 5 U.S.C. 522(a) and 1 CFR part 51. Copies are available from the AOAC INTERNATIONAL, 481 North Frederick Ave., Suite 500, Gaithersburg, MD 20877-2504 and the Center for Food Safety and Applied Nutrition (HFS-200), Food and Drug Administration, 5001 Campus Dr., College Park, MD 20740, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.
1,3-Butanediol
Calcium tin stearate2 percent.
Calcium zinc stearateDo.
Carbon, activated1 percent.
Castor oil, hydrogenated2 percent.
Chlorinated isobutylene-isoprene copolymers complying with § 177.1420
Coco amide (coconut oil fatty acids amides)2 percent.
Cork (cleaned, granulated)
Diebenzamide phenyl disulfide1 percent; for use only in vulcanized natural or synthetic rubber gasket compositions.
Di(C7, C9-alkyl) adipateComplying with § 178.3740 of this chapter; except that, there is no limitation on polymer thickness.
Di-2-ethylhexyl adipate
Di-2-ethylhexyl sebacate2 percent.
Di-2-ethylhexyl terephthalate (CAS Reg. No. 006422-86-2).For use as a plasticizer at levels not exceeding 75 parts per hundred by weight of permitted vinyl chloride homo- and/or copolymer resins used in contact with food of Types I, II, IV-B, VI-A, VI-B, VI-C (up to 15 percent alcohol by volume), VII-B, and VIII described in § 176.170(c) of this chapter, table 1, and under conditions of use A through H described in § 176.170 (c) of this chapter, table 2.
Dihexyl ester of sodium sulfosuccinate1 percent.
Diisodecyl phthalateNo limitation on amount used but for use only in closure-sealing gasket compositions used in contact with non-fatty foods containing no more than 8 percent of alcohol.
Di-[BETA]-naphthyl-p-phenylenediamine1 percent.
Dipentamethylenethiurametetrasulfide0.4 percent; for use only in vulcanized natural or synthetic rubber gasket compositions.
Eicosane (technical grade) (water-white mixture of predominantly straight-chain paraffin hydrocarbons averaging 20 carbon atoms per molecule)
Epoxidized linseed oil
Epoxidized linseed oil modified with trimellitic anhydride
Epoxidized safflower oil
Epoxidized safflower oil modified with trimellitic anhydride
Epoxidized soybean oil modified with trimellitic anhydride
Erucylamide5 percent.
Ethylene-propylene copolymer
Ethylene-propylene modified copolymer elastomers produced when ethylene and propylene are copolymerized with 5-methylene-2-norbornene and/or 5-ethylidine-2-norbornene. The finished copolymer elastomers so produced shall contain not more than 5 weight-percent of total polymer units derived from 5-methylene-2-norbornene and/or 5-ethylidine-2-norbornene, and shall have a minimum viscosity average molecular weight of 120,000 as determined by the method described in § 177.1520(d)(5) , and a minimum Mooney viscosity of 35 as determined by the method described in § 177.1520(d)(6)
Ethylene-vinyl acetate copolymer
Glyceryl mono-12-hydroxystearate (hydrogenated glyceryl ricinoleate)2 percent.
Gutta-percha
Hexamethylenetetramine1 percent.
Hexylene glycol0.5 percent.
Isobutylene-isoprene copolymers complying with § 177.1420
Maleic anhydride-polyethylene copolymer5 percent.
Maleic anhydride-styrene copolymerDo.
2,2'-Methylenebis[6-(1-methylcylcohexyl)-p-cresol]1 percent.
Mixed octylated diphenylamine (CAS Reg. No. 68411-46-1)0.1 percent in isobutylene-isoprene and chlorinated isobutylene-isoprene copolymers complying with § 177.1420 , and brominated isobutylene-isoprene copolymers complying with this section.
Naphthalene sulfonic acid-formaldehyde condensate, sodium salt0.2 percent.
Natural rubber (crepe, latex, mechanical dispersions)
[ALPHA]-cis-9-Octadecenyl-omega-hydroxypoly (oxyethylene); the octadecenyl group is derived from oleyl alcohol and the poly (oxyethylene) content averages 20 moles0.5 percent.
Oleyl alcohol1 percent.
4,4'-Oxybis (benzene sulfonyl hydrazide)0.5 percent.
Paraformaldehyde1 percent.
Polybutadiene
Poly-p-dinitroso benzene (activator for butyl rubber)1 percent; for use only in vulcanized natural or synthetic rubber gasket compositions.
Polyethylene glycol 400 esters of fatty acids derived from animal and vegetable fats and oils1 percent.
Polyisobutylene complying with § 177.1420
Polyoxypropylene-polyoxyethylene condensate, average mol. wt. 2750-30000.05 percent.
Polyurethane resins manufactured from diphenylmethane diisocyanate, 1,4-butanediol, and adipic acid (CAS Reg. No. 26375-23-5).For use only:
No limitation on amount used, but for use only in closure gasket compositions used in contact with food types VI-A and VI-C (up to 15 percent alcohol) under conditions of use D, E, F, and G, as described in § 176.170(c) of this chapter, tables 1 and 2, respectively.
Potassium benzoate1 percent.
Potassium propionate2 percent.
Potassium and sodium persulfate1 percent.
Resorcinol0.24 percent; for use only as a reactive adjuvant substance employed in the production of gelatin-bonded cord compositions for use in lining crown closures. The gelatin so used shall be technical grade or better.
Rosins and rosin derivatives as defined in § 175.300(b)(3)(v) of this chapter for use only in resinous and polymeric coatings on metal substrates; for all other uses as defined in § 178.3870 of this chapter
Sodium cetyl sulfate1 percent.
Sodium decylbenzenesulfonateDo.
Sodium decyl sulfateDo.
Sodium formaldehyde sulfoxylate0.05 percent.
Sodium lauryl sulfate1 percent.
Sodium lignin sulfonate0.2 percent.
Sodium myristyl sulfate (sodium tetradecyl sulfate)0.6 percent.
Sodium nitrite0.2 percent; for use only in annular ring gaskets applied in aqueous dispersions to closures for containers having a capacity of not less than 5 gallons.
Sodium o-phenylphenate0.05 percent.
Sodium polyacrylate5 percent.
Sodium and potassium pentachlorophenate0.05 percent.
Sodium salt of trisopropyl naphthalenesulfonic acid0.2 percent.
Sodium tridecylsulfate0.6 percent.
Stearic acid amide5 percent.
SulfurFor use only as a vulcanizing agent in vulcanized natural or synthetic rubber gasket compositions at a level not to exceed 4 percent by weight of the elastomer content of the rubber gasket composition.
Tallow, sulfated1 percent.
Tin-zinc stearate2 percent.
Tri(mixed mono- and dinonylphenyl) phosphite1 percent.
Vinyl chloride-vinyl stearate copolymer
Zinc dibutyldithiocarbamate0.8 percent; for use only in vulcanized natural or synthetic rubber gasket compositions.

Table 2-Maximum Extractives Tolerances

[In parts per million]

Type of closure-sealing gasket composition Chloroform fraction of water extractives Chloroform fraction of heptane extractives Chloroform fraction of alcohol extractives
1. Plasticized polymers, including unvulcanized or vulcanized or otherwise cured natural and synthetic rubber formed in place as overall discs or annular rings from a hot melt, solution, plastisol, organisol, mechanical dispersion, or latex5050050
2. Preformed overall discs or annular rings of plasticized polymers, including unvulcanized natural or synthetic rubber5025050
3. Preformed overall discs or annular rings of vulcanized plasticized polymers, including natural or synthetic rubber505050
4. Preformed overall discs or annular rings of polymeric or resinous-coated paper, paperboard, plastic, or metal foil substrates5025050
5. Closures with sealing gaskets or sealing compositions as described in 1, 2, 3, and 4, and including paper, paperboard, and glassine used for dry foods only(1)(1)(1)

1 Extractability tests not applicable.

(c) The closure assembly to include the sealing gasket or sealing compound, together with any polymeric or resinous coating, film, foil, natural cork, or glass that forms a part of the food-contact surface of the assembly, when extracted on a suitable glass container with a solvent or solvents characterizing the type of foods, and under conditions of time and temperature characterizing the conditions of its use as determined from tables 3 and 4 shall yield net chloroform-soluble extractives (corrected for zinc as zinc oleate) not to exceed the tolerances specified in table 2, calculated on the basis of the water capacity of the container on which the closure is to be used. Employ the analytical method described in § 175.300 of this chapter, adapting the procedural details to make the method applicable to closures; such as, for example, placing the closed glass container on its side to assure contact of the closure's food-contacting surface with the solvent.

Table 3-Types of Food

I. Nonacid (pH above 5.0), aqueous products; may contain salt or sugar or both, and including oil-in-water emulsions of low- or high-fat content.
II. Acidic (pH 5.0 or below), aqueous products; may contain salt or sugar or both, and including oil-in-water emulsions of low- or high-fat content.
III. Aqueous, acid or nonacid products containing free oil or fat; may contain salt, and including water-in-oil emulsions of low- or high-fat content.
IV. Dairy products and modifications:
A. Water-in-oil emulsions, high- or low-fat.
B. Oil-in-water emulsions, high- or low-fat.
V. Low-moisture fats and oils.
VI. Beverages:
A. Containing alcohol.
B. Nonalcoholic.
VII. Bakery products.
VIII. Dry solids (no end-test required).

Table 4-Test Procedures With Time-Temperature Conditions for Determining Amount of Extractives From Closure-Sealing Gaskets, Using Solvents Simulating Types of Foods and Beverages

Conditions of useTypes of food
(see Table 3)
Extractant
Water (time and temperature) Heptane1 (time and temperature) 8% alcohol
(time and temperature)
A. High temperature heat-sterilized (e.g., over 212 °F)I, IV-B250 °F, 2 hr
III, IV-A, VIIdo150 °F, 2 hr
B. Boiling water-sterilizedII212 °F, 30 min
III, VIIdo120 °F, 30 min
C. Hot filled or pasteurized above 150 °FII, IV-BFill boiling, cool to 100 °F
III, IV-Ado120 °F, 15 min
Vdo
D. Hot filled or pasteurized below 150 °FII, IV-B, VI-B150 °F, 2 hr
III, IV-Ado100 °F, 30 min
Vdo
VI-A150 °F, 2 hr.
E. Room temperature filled and stored (no thermal treatment in the container)II, IV-B, VI-B120 °F, 24 hr
III, IV-Ado70 °F, 30 min
Vdo
VI-A120 °F, 24 hr.
F. Refrigerated storage (no thermal treatment)I, II, III, IV-A, IV-B, VI-B,VII70 °F, 48 hr70 °F, 30 min
VI-A70 °F, 48 hr.
G. Frozen storage (no thermal treatment in the container)I, II, III, IV-B, VII70 °F, 24 hr

1Heptane extractant not applicable to closure-sealing gaskets overcoated with wax.

21 C.F.R. §177.1210

42 FR 14572, Mar. 15, 1977; 42 FR 56728, Oct. 28, 1977, as amended at 47 FR 22090, May 21, 1982; 49 FR 5748, Feb. 15, 1984; 55 FR 34555, Aug. 23, 1990; 61 FR 14480, Apr. 2, 1996; 65 FR 26745 , May 9, 2000; 65 FR 52908 , Aug. 31, 2000; 70 FR 67651 , Nov. 8, 2005; 76 FR 59249 , Sept. 26, 2011; 78 FR 14665 , Mar. 7, 2013; 82 FR 20832 , May 4, 2017
82 FR 20832, 5/4/2017