21 C.F.R. § 177.1200
Current through October 31, 2024
Cellophane may be safely used for packaging food in accordance with the following prescribed conditions:
| List of substances | Limitations (residue and limits of addition expressed as percent by weight of finished packaging cellophane) |
| Acrylonitrile-butadiene copolymer resins | As the basic polymer. |
| Acrylonitrile-butadiene-styrene copolymer resins | Do. |
| Acrylonitrile-styrene copolymer resins | Do. |
| Acrylonitrile-vinyl chloride copolymer resins | Do. |
| N-Acyl sarcosines where the acyl group is lauroyl or stearoyl | For use only as release agents in coatings at levels not to exceed a total of 0.3 percent by weight of the finished packaging cellophane. |
| Alkyl ketene dimers identified in § 176.120 of this chapter | |
| Aluminum hydroxide | |
| Aluminum silicate | |
| Ammonium persulfate | |
| Ammonium sulfate | |
| Behenamide | |
| Butadiene-styrene copolymer | As the basic polymer. |
| 1,3-Butanediol | |
| n-Butyl acetate | 0.1 percent. |
| n-Butyl alcohol | Do. |
| Calcium ethyl acetoacetate | |
| Calcium stearoyl-2-lactylate identified in § 172.844 of this chapter | Not to exceed 0.5 percent weight of cellophane. |
| Carboxymethyl hydroxyethylcellulose polymer | |
| Castor oil, hydrogenated | |
| Castor oil, sulfonated, sodium salt | |
| Cellulose acetate butyrate | |
| Cellulose acetate propionate | |
| Cetyl alcohol | |
| Clay, natural | |
| Coconut oil fatty acid (C12-C18) diethanolamide, coconut oil fatty acid (C12-C18) diethanolamine soap, and diethanolamine mixture having total alkali (calculated as potassium hydroxide) of 16-18% and having an acid number of 25-35 | For use only as an adjuvant employed during the processing of cellulose pulp used in the manufacture of cellophane base sheet. |
| Copal resin, heat processed | As basic resin. |
| Damar resin | |
| Defoaming agents identified in § 176.200 of this chapter | |
| Dialkyl ketones where the alkyl groups are lauryl or stearyl | Not to exceed a total of 0.35 percent. |
| Dicyclohexyl phthalate | Do. |
| Diethylene glycol ester of the adduct of terpene and maleic anhydride | |
| Di(2-ethylhexyl) adipate | |
| Di(2-ethylhexyl) phthalate | Alone or in combination with other phthalates where total phthalates do not exceed 5 percent. |
| Dimethyldialkyl (C8-C18) ammonium chloride | 0.005 percent for use only as a flocculant for slip agents. |
| Di-n-ocyltin bis (2-ethylhexyl maleate) | For use only as a stabilizer at a level not to exceed 0.55 percent by weight of the coating solids in vinylidene chloride copolymer waterproof coatings prepared from vinylidene chloride copolymers identified in this paragraph, provided that such vinylidene chloride copolymers contain not less than 90 percent by weight of polymer units derived from vinylidene chloride. |
| N,N'-Dioleoyethylenediamine, N,N'-dilinoleoylethylene-diamine and N-oleoyl-N'linoleoylethylene-diamine mixture produced when tall oil fatty acids are made to react with ethylenediamine such that the finished mixture has a melting point of 212°-228 °F., as determined by ASTM method D127-60 ("Standard Method of Test for Melting Point of Petrolatum and Microcrystalline Wax" (Revised 1960), which is incorporated by reference; copies are available from University Microfilms International, 300 N. Zeeb Rd., Ann Arbor, MI 48106, or available for inspection at the National Archives and Records Administration (NARA). For information on the availability of this material at NARA, call 202-741-6030, or go to: http://www.archives.gov/federal_register/code_of_federal_regulations/ibr_locations.html.), and an acid value of 10 maximum | 0.5 percent. |
| N,N'-Dioleoylethylenediamine (N,N'-ethylenebisoleamide) | |
| Disodium EDTA | |
| Distearic acid ester of di(hydroxyethyl) diethylenetriamine monoacetate | 0.06 percent. |
| N,N'-Distearoylethylenediamine (N,N'-ethylenebis stearamide) | |
| Epoxidized polybutadiene | For use only as a primer subcoat to anchor surface coatings to the base sheet. |
| Erucamide | |
| Ethyl acetate | |
| Ethylene-vinyl acetate copolymers complying with § 177.1350 | |
| 2-Ethylhexyl alcohol | 0.1 percent for use only as lubricant. |
| Fatty acids derived from animal and vegetable fats and oils, and the following salts of such acids, single or mixed: Aluminum, ammonium, calcium, magnesium, potassium, sodium | |
| Ferrous ammonium sulfate | |
| Fumaric acid | |
| Glycerin-maleic anhydride | As the basic polymer. |
| Glycerol diacetate | |
| Glycerol monoacetate | |
| Hydroxyethyl cellulose, water-insoluble | |
| Hydroxypropyl cellulose identified in § 172.870 of this chapter | |
| Isopropyl acetate | Residue limit 0.1 percent |
| Isopropyl alcohol | Do. |
| Itaconic acid | |
| Lanolin | |
| Lauryl alcohol | |
| Lauryl sulfate salts: ammonium, magnesium, potassium, sodium | |
| Maleic acid | 1 percent. |
| Maleic acid adduct of butadienestyrene copolymer | |
| Melamine formaldehyde | As the basic polymer. |
| Melamine-formaldehyde modified with one or more of the following: Butyl alcohol, diaminopropane, diethylenetriamine, ethyl alcohol, guanidine, imino-bis-butylamine, imino-bis-ethylamine, imino-bis-propylamine, methyl alcohol, polyamines made by reacting ethylenediamine or trimethylenediamine with dichloroethane or dichloropropane, sulfanilic acid, tetraethylenepentamine, triethanolamine, triethylenetetra-mine | As the basic polymer, and used as a resin to anchor coatings to substrate. |
| Methyl ethyl ketone | Residue limit 0.1 percent |
| Methyl hydrogen siloxane | 0.1 percent as the basic polymer. |
| [ALPHA]-Methylstyrene-vinyltoluene copolymer resins (molar ratio 1[ALPHA]-methylstyrene to 3 vinyltoluene) | |
| Mineral oil, white | |
| Mono- and bis-(octadecyldiethylene oxide) phosphates (CAS Reg. No. 62362-49-6) | For use only as a release agent at a level not to exceed 0.6 percent by weight of coatings for cellophane. |
| Naphthalenesulfonic acid-formaldehyde condensate, sodium salt | 0.1 percent, for use only as an emulsifier. |
| Nitrocellulose, 10.9 percent-12.2 percent nitrogen | |
| Nylon resins complying with § 177.1500 | |
| n-Octyl alcohol | For use only as a defoaming agent in the manufacture of cellophane base sheet. |
| Olefin copolymers complying with § 177.1520 | |
| Oleic acid reacted with N-alkyl trimethylenediamine (alkyl C16 to C18) | |
| Oleic acid, sulfonated, sodium salt | |
| Oleyl palmitamide | |
| N,N'-Oleoyl-stearylethylenediamine (N-(2-stearoyl-aminoethyl)oleamide) | |
| Paraffin, synthetic, complying with § 175.250 of this chapter | |
| Pentaerythritol tetrastearate | 0.1 percent. |
| Polyamide resins derived from dimerized vegetable oil acids (containing not more than 20 percent of monomer acids) and ethylenediamine as the basic resin | For use only in cellophane coatings that contact food at temperatures not to exceed room temperature. |
| Polyamide resins having a maximum acid value of 5 and a maximum amine value of 8.5 derived from dimerized vegetable oil acids (containing not more than 10 percent monomer acids), ethylenediamine, and 4,4-bis(4-hydroxyphenyl)pentanoic acid (in an amount not to exceed 10 percent by weight of said polyamide resins) | As the basic resin, for use only in coatings that contact food at temperatures not to exceed room temperature provided that the concentration of the polyamido resins in the finished food-contact coating does not exceed 5 milligrams per square inch of food-contact surface. |
| Polybutadiene resin (molecular weight range 2,000-10,200; bromine number range 210-320) | For use only as an adjuvant in vinylidene chloride copolymer coatings. |
| Polycarbonate resins complying with § 177.1580 | |
| Polyester resin formed by the reaction of the methyl ester of rosin, phthalic anhydride, maleic anhydride, and ethylene glycol, such that the polyester resin has an acid number of 4 to 11, a drop-softening point of 70 °C-92 °C, and a color of K or paler | |
| Polyethylene | |
| Polyethyleneaminostearamide ethyl sulfate produced when stearic acid is made to react with equal parts of diethylenetriamine and triethylenetetramine and the reaction product is quaternized with diethyl sulfate | 0.1 percent. |
| Polyethylene glycol (400) monolaurate | |
| Polyethylene glycol (600) monolaurate | |
| Polyethylene glycol (400) monooleate | |
| Polyethylene glycol (600) monooleate | |
| Polyethylene glycol (400) monostearate | |
| Polyethylene glycol (600) monostearate | |
| Polyethylene, oxidized: complying with the identity prescribed in § 177.1620(a) | |
| Polyethylenimine | As the basic polymer, for use as a resin to anchor coatings to the substrate and for use as an impregnant in the food-contact surface of regenerated cellulose sheet in an amount not to exceed that required to improve heat-sealable bonding between coated and uncoated sides of cellophane. |
| Polyisobutylene complying with § 177.1420 | |
| Polyoxypropylene-polyoxyethylene block polymers (molecular weight 1,900-9,000) | For use as an adjuvant employed during the processing of cellulose pulp used in the manufacture of cellophane base sheet. |
| Polypropylene complying with § 177.1520 | |
| Polystyrene | As the basic polymer. |
| Polyvinyl acetate | Do. |
| Polyvinyl alcohol (minimum viscosity of 4 percent aqueous solution at 20 °C of 4 centipoises) | |
| Polyvinyl chloride | As the basic polymer. |
| Polyvinyl stearate | Do. |
| n-Propyl acetate | Residue limit 0.1 percent. |
| n-Propyl alcohol | Do. |
| Rapeseed oil, blown | |
| Rosins and rosin derivatives as provided in § 178.3870 of this chapter | |
| Rubber, natural (natural latex solids) | |
| Silica | |
| Silicic acid | |
| Sodium m-bisulfite | |
| Sodium dioctyl sulfosuccinate | |
| Sodium dodecylbenzenesulfonate | |
| Sodium lauroyl sarcosinate | 0.35 percent; for use only in vinylidene chloride copolymer coatings. |
| Sodium oleyl sulfate-sodium cetyl sulfate mixture | For use only as an emulsifier for coatings; limit 0.005 percent where coating is applied to one side only and 0.01 percent where coating is applied to both sides. |
| Sodium silicate | |
| Sodium stearoyl-2-lactylate identified in § 172.846 of this chapter | Not to exceed 0.5 percent weight of cellophane. |
| Sodium sulfate | |
| Sodium sulfite | |
| Spermaceti wax | |
| Stannous oleate | |
| 2-Stearamido-ethyl stearate | |
| Stearyl alcohol | |
| Styrene-maleic anhydride resins | As the basic polymer. |
| Terpene resins identified in § 172.615 of this chapter | |
| Tetrahydrofuran | Residue limit of 0.1 percent. |
| Titanium dioxide | |
| Toluene | Residue limit of 0.1 percent. |
| Toluene sulfonamide formaldehyde | 0.6 percent as the basic polymer. |
| Triethylene glycol | |
| Triethylene glycol diacetate, prepared from triethylene glycol containing not more than 0.1 percent of diethylene glycol | |
| 2,2,4-Trimethyl-1,3 pentanediol diisobutyrate | For use only in cellophane coatings and limited to use at a level not to exceed 10 percent by weight of the coating solids except when used as provided in § 178.3740 of this chapter |
| Urea (carbamide) | |
| Urea formaldehyde | As the basic polymer. |
| Urea formaldehyde modified with methanol, ethanol, butanol diethylenetriamine, triethylenetetramine, tetraethylenepenta-mine, guanidine, sodium sulfite, sulfanilic acid, imino-bis-ethylamine, imino-bis-propylamine, imino-bis-butylamine, diaminopropane, diaminobutane, aminomethylsulfonic acid, polyamines made by reacting ethylenediamine or trimethylenediamine with dichlorethane or dichloropropane | As the basic polymer, and used as a resin to anchor coatings to the substrate. |
| Vinyl acetate-vinyl chloride copolymer resins | As the basic polymer. |
| Vinyl acetate-vinyl chloride-maleic acid copolymer resins | Do. |
| Vinylidene chloride copolymerized with one or more of the following: Acrylic acid, acrylonitrile, butyl acrylate, butyl methacrylate, ethyl acrylate, 2-ethylhexyl acrylate, 2-ethylhexyl methacrylate, ethyl methacrylate, itaconic acid, methacrylic acid, methyl acrylate, methyl methacrylate, propyl acrylate, propyl methacrylate, vinyl chloride | Do. |
| Vinylidene chloride-methacrylate decyloctyl copolymer | Do. |
| Wax, petroleum, complying with § 178.3710 of this chapter |
21 C.F.R. §177.1200