023-3 Wyo. Code R. § 3-19

Current through April 27, 2019

Section 3-19 - Meter Reading and Billing

(a) Each service meter shall clearly indicate the units of measurement. If the utility invoices customers in a different unit of measurement than the service meter indicates, the conversion factor shall be stated on the customer bill. In cases where special types of meters are used or where the readings of a meter must be multiplied by a constant to obtain the units consumed, that information shall be placed on the customer bill.

(b) Bills shall be rendered periodically and shall show the meter readings at the beginning and end of the billing period, the date of the meter readings, the units consumed, the class of service and other information necessary to enable the customer to readily re-compute the amount of the bill. Each bill shall bear upon its face the date of the bill and the latest date it may be paid without penalty. Estimated meter readings or budget billing shall be clearly identified on the bill.

• (i) Electric and gas service meters shall be read monthly as nearly as possible on the same day within a billing cycle;

• (ii) Water service meters shall be read at intervals authorized per tariff.

023-3 Wyo. Code R. § 3-19

Adopted, Eff. 3/21/2016.

Amended, Eff. 4/8/2019.