020-1 Wyo. Code R. § 1-6
In accordance with W.S. 35-12-107 and W.S. 35-12-109, the applicant shall abide by the following rules and conditions:
(a) Prior to submitting its application or request for waiver, each applicant shall confer with the Division to determine the number of copies of the application or request for waiver to be filed with the Division. The applicant shall file a minimum of forty (40) copies of the application with the Division. The applicant shall not be required to file more than seventy-five (75) copies of the application without prior approval of the Council.
(b) The application or request for waiver shall be typed, printed, or otherwise legibly reproduced on 8 ½-inch by 11-inch paper. Maps, drawings, charts, or other documents that are bound in the application or request for waiver shall be cut or folded to 8 ½-inch by 11-inch size. All pages in an application or request for waiver shall be consecutively numbered.
(c) The application or request for waiver shall be verified by the applicant as to its truth and accuracy, upon oath or affirmation. Such application or request for waiver shall be signed by the president of the corporation or owner of the company, or another official designated by the bylaws to obligate and bind the applicant. The application or request for waiver shall be accompanied by a letter of transmittal which shall contain the following information:
(d) The Applicant shall notify the Division immediately whenever, subsequent to submitting an application or waiver request under the Act, a material change in the design, location, schedule, or scope of the industrial facility has occurred. Such notification by the applicant may constitute a request for amendment pursuant to W.S. 35-12-106(c) and Section 15 of these rules if the Division determines that such differences materially change the nature, location or impact of the proposed industrial facility.
(e) An applicant may apply for a permit to construct an industrial facility in phases over an extended period.
(f) As part of the application, the applicant shall submit a summary of the entire application. The summary shall contain references to supporting data and analysis contained in the application.
(g) Whenever the Act or these rules require information concerning the industrial facility to be submitted to the Council and the applicant is required to submit the same or similar information to another state, federal or local agency having jurisdiction, the applicant may submit the information to the Council in the same format required by the other agency.
(h) Applicants may fulfill informational requirements of the regulations and the Act by describing the area of jurisdiction covered by other regulatory agencies in the state.
(i) The application shall contain a table containing all commitments stated in the application and provide the page number where each commitment is discussed in the body of the application. The table shall also provide a narrative of all the commitments made to local governments in accordance with W.S. 35-12- 107(b)(xi) and W.S. W.S. 35-12-109(a)(xiii).
020-1 Wyo. Code R. § 1-6
Amended, Eff. 4/4/2017.
Amended, Eff. 8/9/2018.