Wis. Admin. Code Department of Natural Resources NR 856.13

Current through November 25, 2024
Section NR 856.13 - Determining withdrawal capacity
(1) The withdrawal capacity for a property is the total capacity in gallons per day from all water sources on the property.

Note: The withdrawal capacity may not necessarily be the same as the approved maximum daily withdrawal set forth by another department approval or permit, such as a high capacity well approval or a permit issued under s. 30.18, Stats.

(2) The withdrawal capacity for a public water supply is the total capacity from all water sources in the system.
(3) The capacity of individual water sources shall be one of the following:
(a) For flowing sources, the maximum flow rate.
(b) For pumped sources, the maximum hydraulic capacity of the most restrictive component of the water supply system. If the most restrictive component is a pump, the maximum capacity is determined based on the pump curve at the lowest system pressure setting.

Wis. Admin. Code Department of Natural Resources NR 856.13

CR 10-059: cr. Register December 2010 No. 660, eff. 1-1-11.