Current through Register Vol. XLI, No. 50, December 13, 2024
Section 64-45-6 - Lead Inspector Duties6.1. A licensed lead inspector shall; 6.1.a. Thoroughly inspect interior and exterior surfaces suspected of containing lead that may be affected by renovation or demolition, and sample the materials for lead content or confirm lead content with an XRF analyzer.6.1.b. Generate a written report that at a minimum;6.1.b.1. Identifies by narrative any sampling location where the presence of lead containing material has been confirmed; 6.1.b.2. Details the location and amount of all materials that contain lead; 6.1.b.3. Lists analysis, XRF results, or both for all samples;6.1.b.4. Includes drawings and narrative descriptions of locations of samples and/or XRF readings; and6.1.b.5. Includes a statement that the inspection is not a risk assessment.6.1.c. Adequately sample each area or room of an abatement project for clearance to verify that dust, soil and waste material lead levels are below the contamination standards as defined in sections 3.6, 3.7 and 3.8 of this rule.