W. Va. Code R. agency 45, tit. 45, ser. 45-18, tbl. 45-18F
Emission limits for existing commercial and industrial solid waste incinerators that apply before February 7, 2018b
Air pollutant | Emission limit a | Averaging time | Performance test methods |
Cadmium | 0.004 milligrams per dry standard cubic meter. | 3-run average (1-hour minimum sample time per run). | Performance test (Method 29 of 40CFR 60, appendix A) |
Carbon monoxide | 157 parts per million by dry volume. | 3-run average (1-hour minimum sample time per run). | Performance test (Method 10, 10A, or 10B, of 40CFR 60, appendix A) |
Dioxins/furans (toxic equivalency basis) | 0.41 nanograms per dry standard cubic meter. | 3-run average (1-hour minimum sample time per run). | Performance test (Method 23 of 40CFR 60, appendix A) |
Hydrogen chloride | 62 parts per million by dry volume. | 3-run average (For Method 26, collect a minimum volume of 120 liters per run. For Method 26A, collect a minimum volume of 1 dry standard cubic meter per run). | Performance test (Method 26 or 26A of 40CFR 60, appendix A-8) |
Lead | 0.04 milligrams per dry standard cubic meter. | 3-run average (1-hour minimum sample time per run). | Performance test (Method 29 of 40CFR 60, appendix A) |
Mercury | 0.47 milligrams per dry standard cubic meter. | 3-run average (1-hour minimum sample time per run). | Performance test (Method 29 or 30B of 40CFR 60, appendix A-8) or ASTM D6784-02 (reapproved 2008) |
Nitrogen oxides | 388 parts per million by dry volume. | 3-run average (1-hour minimum sample time per run). | Performance test (Method 7 or 7E of 40CFR 60, appendix A-4) |
Opacity | 10 percent | Three 1-hour blocks consisting of ten 6-minute average opacity values. | Performance test (Method 9 of 40CFR 60, appendix A-4) |
Particulate matter | 70 milligrams per dry standard cubic meter. | 3-run average (1-hour minimum sample time per run). | Performance test (Method 5 or 29 of 40CFR 60, appendix A) |
Sulfur dioxide | 20 parts per million by dry volume. | 3-run average (1-hour minimum sample time per run). | Performance test (Method 6 or 6C of 40CFR 60, appendix A) |
aAll emission limitations (except for opacity) are measured at 7 percent oxygen, dry basis at standard conditions.
bApplies only to incinerators subject to the CISWI standards through a state plan prior to June 4, 2010. The date specified in the state plan can be no later than 3 years after the effective date of approval of a revised state plan or February 7, 2018.
W. Va. Code R. agency 45, tit. 45, ser. 45-18, tbl. 45-18F