Wash. Admin. Code § 296-807-18055

Current through Register Vol. 24-23, December 1, 2024

Section 296-807-18055 - Make sure flanges are in good condition

(1) You must make sure flange bearing surfaces are in good condition.

(2) You must replace or remachine any flange with a mounting surface that has any of the following problems:

(a) Warped;

(b) Burred on the bearing surface;

(c) Excessively worn (thickness or diameter);

(d) Out of true.

Note:

Flanges that are refaced or trued need to satisfy minimum dimension requirements specified in ANSI B7.1-2000, Safety Requirements for the Use, Care and Protection of Abrasive Wheels.

Wash. Admin. Code § 296-807-18055

Amended by WSR 15-23-086, Filed 11/17/2015, effective 12/18/2015

Statutory Authority: RCW 49.17.010, [49.17].040,[49.17].050, and [49.17].060. 03-09-009, § 296-807-18055, filed 4/4/03, effective 8/1/03.