Wash. Admin. Code § 296-307-53009

Current through Register Vol. 24-23, December 1, 2024

Section 296-307-53009 - Equipment an employer must provide for rim wheel servicing

(1) The employer must furnish an air line assembly and ensure that employees use it for inflating tire.

(2) The air line assembly must contain the following components:

(a) A clip-on chuck;

(b) An in-line valve with a pressure gauge or a presetta-ble regulator; and

(c) Enough hose between the clip-on chuck and the inline valve (if one is used) to allow the employee to stand outside the trajectory.

(3) Current charts or rim manuals for the types of wheels being serviced must be available in the service area.

(4) The employer must furnish the tools recommended in the rim manual for the type of wheel being serviced and ensure that they are the only tools used to service rim wheels.

Wash. Admin. Code § 296-307-53009

Amended by WSR 20-21-091, Filed 10/20/2020, effective 11/20/2020

97-09-013, recodified as § 296-307-53009, filed 4/7/97, effective 4/7/97. Statutory Authority: RCW 49.17.040,[49.17.]050 and [49.17.]060. 96-22-048, § 296-306A-53009, filed 10/31/96, effective 12/1/96.