Section R708-31-8 - Camera Requirements(1) A manufacturer submitting a system for certification shall ensure cameras installed on a system shall:(a) not impede the field of vision for the safe and legal operation of the vehicle;(b) not pose a threat to the driver or passengers of the vehicle in the event of dislodgement;(c) take an image of the individual with sufficient clarity to allow identification;(d) capture images of the individual conducting the breath alcohol test for the following: (i) successful completion of the initial breath test sample;(ii) successful completion of any retest breath test sample;(iii) unsuccessful delivery of the initial breath test sample;(iv) unsuccessful delivery of any retest breath test sample; and(v) high breath alcohol test results;(e) capture identifiable images in any lighting condition; and(f) incorporate tamper detection features that include:(i) covering, blocking, or coating of the lens to distort the image;(ii) repositioning of the field of view so that it no longer is aimed at the driver; and(iii) disconnection from communication or power from the system.(2) Images taken by the camera shall be stored by the manufacturer with the:(a) date and time of the image capture;(b) results of each breath test; and(c) corresponding system serial number of the: (3) A manufacturer shall have data readily available to the division upon request.(4) A system shall be decertified by the division if the system is not equipped with a camera by October 31, 2024.Utah Admin. Code R708-31-8
Adopted by Utah State Bulletin Number 2024-06, effective 3/12/2024