Section R708-31-7 - Manufacturer Performance StandardsA manufacturer shall:
(1) designate a manufacturer representative as a contact person for the division;(2) notify the division in writing of: (a) a change in manufacturer representative within seven days of the change;(b) any recalls, defects, or system issues that would result in the system no longer meeting the standards in Section R708-31-4;(c) any system or model presenting a public safety risk, or five or more failures of an installed system in any 12 month period; and(d) a certification, license, or authorization to manufacture ignition interlock devices that has been denied, canceled, suspended, revoked or any similar action in any jurisdiction outside of Utah within 30 days of receiving the notice of the action;(3) not allow programming or modification of system features to be made by installers;(4) make any data captured through the system or camera readily available to the division;(5) agree to ensure proper record keeping in a format approved by the division;(6) provide testimony, at no cost to, and on behalf of the state or a political subdivision of the state relating to; (a) any aspect of the installation, monitoring, repair, use, or removal, of a system;(b) interpretation of any report or information recorded in the data storage system of a system; and(c) the performance of any other duties required;(7) upon the request of the division, for each model approved by the division, provide a total of not less than 10 hours of training to division employees at no cost to this state that shall:(a) be held at times and locations within the state designated by the division;(b) familiarize division employees with the installation, operation, monitoring, repair, and removal of the system; and(c) include the training and instructions that an installer will give to customers.Utah Admin. Code R708-31-7
Adopted by Utah State Bulletin Number 2024-06, effective 3/12/2024