Section R392-200-15 - Shower FacilitiesThe governing body shall ensure that:
(1) a shower facility is provided: (a) for classes in physical education if students are required to change clothes;(b) with hot and cold water at each shower head utilizing a mixing valve or combination faucet;(c) with at least two privacy showers for schools constructed after January 1, 2012;(d) with sufficient shower fixtures to accommodate the number of individuals who wish to shower at any one time, including the two shower heads required in Subsection (1)(c), as applicable;(e) with a supply of liquid soap made available as needed;(f) with a conveniently located toilet room;(g) with towel racks or hooks; and(h) with a ventilation system installed and maintained in accordance with Mechanical Code;(2) each shower facility is constructed:(a) to prevent water flow into drying or dressing areas; and(b) with smooth, nonabsorbent, and easily cleanable materials;(3) a dressing room area is provided adjacent to each shower facility that is constructed with: (a) a non-skid floor sloped to drain; and(b) hard surfaces or materials that cannot absorb water;(4) each shower facility, dressing room, and adjacent area is kept clean and free of clutter;(5) each shower facility wall, ceiling, and fixture is kept clean and maintained in good repair;(6) shower floors are cleaned and disinfected daily, as needed, after any school activity use; and(7) if any student is provided with a towel, each towel is laundered at least weekly and is not shared with another student.Utah Admin. Code R392-200-15
Adopted by Utah State Bulletin Number 2022-19, effective 9/27/2022Amended by Utah State Bulletin Number 2023-13, effective 6/14/2023