Section R392-200-14 - Handwashing SinksThe governing body shall ensure that:
(1) a handwashing sink is placed in or immediately adjacent to each toilet facility;(2) a handwashing sink is located in or conveniently adjacent to at least the following instruction areas: (a) elementary classrooms;(b) life skills classrooms;(c) art classrooms, except digital media;(g) wood and metal shops;(h) drama set building areas;(i) any location where an individual is required to handle a liquid that may burn, irritate, or otherwise harm the skin;(j) any location where an individual changes a diaper, as specified in Section R392-200-22; and(k) any location where an individual is required to handle plants or animals.(3) water provided at a handwashing sink is tempered to or adjustable to a minimum of 100 degrees Fahrenheit and does not exceed 110 degrees Fahrenheit;(4) each handwashing sink is installed at a height appropriate to the individuals who use it;(5) each handwashing sink is provided with:(a) hot and cold water; and(b) a faucet that utilizes a mixing valve or a combination faucet;(6) each self-closing, slow-closing, or metering faucet in use is designed to provide a flow of water for a sufficient length of time to rinse both hands;(7) each handwashing sink and any related fixture is kept clean and maintained in good repair.(8) hand cleaning soap or detergent is provided at a convenient location near each handwashing sink;(9) one of the following approved hand drying provisions is conveniently located near each handwashing sink: (a) disposable paper towels that are: (i) in a protective dispenser; and(ii) dispensed one towel at a time;(b) a forced-air mechanical hand-drying device that provides heated air; or(c) cloth towels if a towel or segment of a roll cloth towel is:(i) provided to each person; and(ii) laundered after use;Utah Admin. Code R392-200-14
Adopted by Utah State Bulletin Number 2022-19, effective 9/27/2022Amended by Utah State Bulletin Number 2023-13, effective 6/14/2023