Section R307-150-4 - Sulfur Dioxide Milestone Inventory Requirements(1) Annual Sulfur Dioxide Emission Report. (a) Sources identified in Subsection R307-150-3(1) shall submit an annual inventory of sulfur dioxide emissions beginning with calendar year 2003 for emissions units including fugitive emissions. (b) The inventory shall include the rate and period of emissions, excess or breakdown emissions, startup and shut down emissions, the specific emissions unit that is the source of the air pollution, type and efficiency of the air pollution control equipment, percent of sulfur content in fuel and how the percent is calculated, and other information necessary to quantify operation and emissions and to evaluate pollution control efficiency. The emissions of a pollutant shall be calculated using the source's actual operating hours, production rates, and types of materials processed, stored, or combusted during the inventoried time period.(2) Each source subject to Section R307-150-4 that is also subject to 40 CFR Part 75 reporting requirements shall submit a summary report of annual sulfur dioxide emissions that were reported to the Environmental Protection Agency under 40 CFR Part 75 in lieu of the reporting requirements in (1) above.(3) Changes in Emission Measurement Techniques. Each source subject to Section R307-150-4 that uses a different emission monitoring or calculation method than was used to report their sulfur dioxide emissions in 2006 under Rule R307-150 or 40 CFR Part 75 shall adjust their reported emissions to be comparable to the emission monitoring or calculation method that was used in 2006. The calculations that are used to make this adjustment shall be included with the annual emission report.Utah Admin. Code R307-150-4
Amended by Utah State Bulletin Number 2016-1, effective 12/15/2015Amended by Utah State Bulletin Number 2018-7, effective 3/5/2018Amended by Utah State Bulletin Number 2020-18, effective 9/3/2020