Section R23-1-1304 - Methods of Construction Contract Management(1) This rule contains provisions applicable to the selection of the appropriate type of construction contract management.(2) It is intended that the director have sufficient flexibility in formulating the construction contract management method for a particular project to fulfill the needs of the division. The methods for achieving the purposes set forth in this rule are not to be construed as an exclusive list.(3) Before choosing the construction contracting method to use, a careful assessment must be made by the director of the requirements the project. The director shall consider, at a minimum, the following factors: (a) when the project must be ready to be occupied;(b) the type of project, for example, housing, offices, labs, heavy or specialized construction;(c) the extent to which the requirements of the division and the way in which they are to be met are known;(d) the location of the project;(e) the size, scope, complexity, and economics of the project;(f) the amount and type of financing available for the project, including whether the budget is fixed or what the source of funding is, for example, general or special appropriation, federal assistance moneys, general obligation bonds or revenue bonds, lapsing or nonlapsing status and legislative intent language;(g) the availability, qualification, and experience of the division's personnel to be assigned to the project and how much time the division's personnel can devote to the project;(h) the availability, qualifications and experience of outside consultants and contractors to complete the project under the various methods being considered;(i) the results achieved on similar projects in the past and the methods used; and(j) the comparative advantages and disadvantages of the construction contracting method and how they might be adapted or combined to fulfill the needs of the using agencies.(5) The following descriptions are provided for the more common construction contracting management methods which may be used by the division. The methods described are not all mutually exclusive and may be combined on a project. These descriptions are not intended to be fixed in respect to all construction projects. In each project, these descriptions may be adapted to fit the circumstances of that project. (a) Single Prime (General) Contractor. The single prime general contractor method is typified by one business, acting as a general contractor, contracting with the division to timely complete an entire construction project in accordance with drawings and specifications provided by the division. Generally, the drawings and specifications are prepared by an architectural or engineering firm under contract with the division. Further, while the general contractor may take responsibility for successful completion of the project, much of the work may be performed by specialty contractors with whom the general contractor has entered into subcontracts.(b) Design-Build. In a design-build project, an entity, often a team of a general contractor and a designer, contract directly with the division to meet the division's requirements as described in a set of performance specifications or a program. Design responsibility and construction responsibility both rest with the design-build contractor. This method can include instances where the design-build contractor supplies the site as part of the package.(c) Construction Manager/General Contractor (Construction Manager at Risk). The division may contract with the construction manager early in a project to assist in the development of a cost-effective design. In a Construction Manager/General Contractor (CM/GC) method, the CM/GC becomes the general contractor and is at risk for all the responsibilities of a general contractor for the project, including meeting the specifications, complying with applicable laws, rules, and regulations, that the project will be completed on time and will not exceed a specified maximum price.Utah Admin. Code R23-1-1304
Adopted by Utah State Bulletin Number 2015-7, effective 3/3/2015Amended by Utah State Bulletin Number 2022-06, effective 2/24/2022Amended by Utah State Bulletin Number 2023-04, effective 2/8/2023