S.D. Admin. R. 61:08:09:01

Current through Register Vol. 51, page 67, December 16, 2024

Section 61:08:09:01 - Definitions

Words defined in SDCL 34-29A-1 have the same meaning when used in this chapter. In addition, terms used in this chapter mean:

(1) "ASME," American Society of Mechanical Engineers;

(2) "Hydrostatic test," a test performed to detect leaks, as prescribed in §§ 61:08:09:25 to 61:08:09:28, inclusive;

(3) "Inspector," a person qualified to inspect historic boilers pursuant to § 61:08:09:55;

(4) "MAWP," the maximum allowable working pressure of a boiler calculated by the formula in § 61:08:09:13;

(5) "National Board," National Board of Boiler and Pressure Vessel Inspectors;

(6) "psi," pounds per square inch;

(7) "Repairs," the work necessary to restore a historic power boiler to or maintain the boiler in a safe operating condition provided there is no basic change in the original design;

(8) "Schedule 80," pipe thickness requirements;

(9) "Ultrasonic examination," a method of examination using ultrasound which provides indications of surface and subsurface discontinuities in the metal.

S.D. Admin. R. 61:08:09:01

23 SDR 139, effective 3/5/1997.

General Authority: SDCL 34-29A-14.1.

Law Implemented: SDCL 34-29A-14.1.