N.J. Admin. Code § 13:20-50A.24

Current through Register Vol. 56, No. 21, November 4, 2024

Section 13:20-50A.24 - Steering gear

(a) The steering gear shall conform to the chassis manufacturer's standard and shall be designed to ensure proper performance when the school bus is operated with maximum load and at maximum speed.

(b) The steering mechanism shall be accessible for external adjustment.

(c) No changes shall be made to the steering apparatus that are not approved by the chassis manufacturer.

(d) There shall be a clearance of at least two inches between the steering wheel and the cowl, instrument panel, windshield, or any other surface.

(e) Power steering is required and shall be of the integral-type with integral valves.

(f) The steering system shall be designed to provide a means of lubrication for all wear points, if wear points are not permanently lubricated.

N.J. Admin. Code § 13:20-50A.24