N.J. Admin. Code § 13:20-50A.11

Current through Register Vol. 56, No. 24, December 18, 2024

Section 13:20-50A.11 - Frame

(a) The frame or its equivalent shall be of such design and strength characteristics as to correspond to at least standard practices for trucks of the same general load characteristics.

(b) Frames shall not be modified for the purpose of extending the wheelbase.

(c) Holes in the top or bottom flanges or side units of the frame shall not be permitted except as provided in the original chassis frame. Welding to the frame shall be by the chassis manufacturer or as approved by the chassis manufacturer.

(d) Frame lengths shall be established in accordance with the design criteria for the completed vehicle.

N.J. Admin. Code § 13:20-50A.11