N.H. Admin. Code § Env-A 1212.06

Current through Register No. 50, December 12, 2024

Section Env-A 1212.06 - VOC Limits for Miscellaneous Plastic Parts and Products Coating

(a) Except as specified in (b), below, the owner or operator of a miscellaneous plastic parts and products coating operation shall control VOC emissions by one of the following control options, provided that if a specific coating is subject to more than one emission limit, the least stringent emission limit shall apply:

(1) Control option 1 shall consist of the use of low-VOC content coatings as applied, excluding water and exempt compounds, as specified in table 1212-3, below:

Table 1212-3 VOC Content Limits Based on Low-VOC Coatings

Coating Category	kg VOC/l coating	lb VOC/gal coating
General, One-Component	0.28	2.3
General, Multi-Component	0.42	3.5
Electric Dissipating Coatings and Shock-Free Coatings	0.80	6.7
Extreme Performance	0.42 (2-pack coatings)	3.5 (2-pack coatings)
Metallic	0.42	3.5
Military Specification	0.34 (1 pack) 0.42 (2 pack)	2.8 (1 pack) 3.5 (2 pack)
Mold-Seal	0.76	6.3
Multi-Colored Coatings	0.68	5.7
Optical Coatings	0.80	6.7
Vacuum-Metalizing	0.80	6.7

(2) Control option 2 shall consist of the use of one or more add-on controls capable of achieving an overall VOC control efficiency of 90 percent; or

(3) Control option 3 shall consist of using a combination of low-VOC content coatings and one or more add-on controls to meet the limits calculated pursuant to Env-A 1205.01 or specified in table 1212-4, below:

Table 1212-4 VOC Content Limits Per Volume Solids

Coating Category	kg VOC/l solids	lb VOC/gal solids
General, One-Component	0.40	3.35
General, Multi-Component	0.80	6.67
Electric Dissipating Coatings and Shock-Free Coatings	8.96	74.7
Extreme Performance	0.80 (2-pack coatings)	6.67 (2-pack coatings)
Metallic	0.80	6.67
Military Specification	0.54 (1 pack) 0.80 (2 pack)	4.52 (1 pack) 6.67 (2 pack)
Mold-Seal	5.24	43.7
Multi-Colored Coatings	3.04	25.3
Optical Coatings	8.96	74.7
Vacuum-Metalizing	8.96	74.7

(b) The VOC limits specified in (a), above, shall not apply to the following types of coatings and coating operations:

(1) Touch-up and repair coatings;

(2) Stencil coatings applied on clear or translucent substrates;

(3) Clear or translucent coatings;

(4) Coatings applied at a paint manufacturing facility while conducting performance tests on the coatings;

(5) Any individual coating category used in volumes less than 50 gallons in any one year, if substitute compliant coatings are not available, provided that the total usage of all such coatings does not exceed 200 gallons per year, per facility;

(6) Reflective coating applied to highway cones;

(7) Mask coatings that are less than 0.5 millimeter thick when dried and the area coated is less than 25 square inches;

(8) EMI/RFI shielding coatings; and

(9) Heparin-benzalkonium chloride (HBAC)-containing coatings applied to medical devices, provided that the total usage of all such coatings does not exceed 100 gallons per year, per facility.

N.H. Admin. Code § Env-A 1212.06

(See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11

Amended by Volume XXXIX Number 46, Filed November 14, 2019, Proposed by #12899, Effective 10/17/2019, Expires 10/17/2029