N.H. Admin. Code § Env-A 1212.04

Current through Register No. 50, December 12, 2024

Section Env-A 1212.04 - VOC Limits for Miscellaneous Metal Parts and Products Coating

Except as specified in Env-A 1212.05, the owner or operator of a miscellaneous metal parts and products coating operation subject to this part shall control VOC emissions by one of the following control options, provided that if a specific coating is subject to more than one emission limit, the least stringent emission limit shall apply:

(a) Subject to (b), below, control option 1 shall consist of the use of low-VOC content coatings as applied, excluding water and exempt compounds, as specified in table 1212-1, below:

Table 1212-1: VOC Content Limits Based on Low-VOC Coatings

Coating Category	Air Dried		Baked
	kg VOC/l coating	lb VOC/gal coating	kg VOC/l coating	lb VOC/gal coating
General, One-Component	0.34	2.8	0.28	2.3
General, Multi-Component	0.34	2.8	0.28	2.3
Camouflage	0.42	3.5	0.42	3.5
Electric-Insulating Varnish	0.42	3.5	0.42	3.5
Etching Filler	0.42	3.5	0.42	3.5
Extreme High-Gloss	0.42	3.5	0.36	3.0
Extreme Performance	0.42	3.5	0.36	3.0
Heat-Resistant	0.42	3.5	0.36	3.0
High Performance Architectural	0.74	6.2	0.74	6.2
High Temperature	0.42	3.5	0.42	3.5
Metallic	0.42	3.5	0.42	3.5
Military Specification	0.34	2.8	0.28	2.3
Mold-Seal	0.42	3.5	0.42	3.5
Pan-Backing	0.42	3.5	0.42	3.5
Prefabricated Architectural Multi-Component	0.42	3.5	0.28	2.3
Prefabricated Architectural One-Component	0.42	3.5	0.28	2.3
Pretreatment Coatings	0.42	3.5	0.42	3.5
Repair and Touch Up	0.42	3.5	0.36	3.0
Silicone-Release	0.42	3.5	0.42	3.5
Solar-Absorbent	0.42	3.5	0.36	3.0
Vacuum-Metalizing	0.42	3.5	0.42	3.5
Drum Coating, New, Exterior	0.34	2.8	0.34	2.8
Drum Coating, New, Interior	0.42	3.5	0.42	3.5
Drum Coating, Reconditioned, Exterior	0.42	3.5	0.42	3.5
Drum Coating, Reconditioned, Interior	0.50	4.2	0.50	4.2

(b) Until January 1, 2016, the content limit for the following coatings shall be as specified:

(1) For air-dried general, one component and general, multi-component coatings, 0.42 kg VOC/l, equivalent to 3.5 lb VOC/gallon; and

(2) For baked general, one component and general, multi-component coatings shall be 0.36 kg VOC/l, equivalent to 3.0 lb VOC/gallon;

(c) Control option 2 shall consist of using a combination of low-VOC content coatings and one or more add-on controls to meet the limits calculated pursuant to Env-A 1205.01 or specified in table 1212-2, below:

Table 1212-2 VOC Content Limits Per Volume Solids

Coating Category	Air Dried		Baked
	kg VOC/l solids	lb VOC/gal solids	kg VOC/l solids	lb VOC/gal solids
General, One-Component	0.54	4.52	0.40	3.35
General, Multi-Component	0.54	4.52	0.40	3.35
Camouflage	0.80	6.67	0.80	6.67
Electric-Insulating Varnish	0.80	6.67	0.80	6.67
Etching Filler	0.80	6.67	0.80	6.67
Extreme High-Gloss	0.80	6.67	0.61	5.06
Extreme Performance	0.80	6.67	0.61	5.06
Heat-Resistant	0.80	6.67	0.61	5.06
High Performance Architectural	4.56	38.0	4.56	38.0
High Temperature	0.80	6.67	0.80	6.67
Metallic	0.80	6.67	0.80	6.67
Military Specification	0.54	4.52	0.40	3.35
Mold-Seal	0.80	6.67	0.80	6.67
Pan Backing	0.80	6.67	0.80	6.67
Prefabricated Architectural Multi-Component	0.80	6.67	0.40	3.35
Prefabricated Architectural One-Component	0.80	6.67	0.40	3.35
Pretreatment Coatings	0.80	6.67	0.80	6.67
Silicone Release	0.80	6.67	0.80	6.67
Solar-Absorbent	0.80	6.67	0.61	5.06
Vacuum-Metalizing	0.80	6.67	0.80	6.67
Drum Coating, New, Exterior	0.54	4.52	0.54	4.52
Drum Coating, New, Interior	0.80	6.67	0.80	6.67
Drum Coating, Reconditioned, Exterior	0.80	6.67	0.80	6.67
Drum Coating, Reconditioned, Interior	1.17	9.78	1.17	9.78

(d) Control option 3 shall consist of the use of one or more add-on controls capable of achieving an overall VOC capture and control efficiency of 90 percent.

N.H. Admin. Code § Env-A 1212.04

(See Revision Note at chapter heading for Env-A 1200) #9933, eff 6-1-11; amd by #10145, eff 6-19-12

Amended by Volume XXXIX Number 46, Filed November 14, 2019, Proposed by #12899, Effective 10/17/2019, Expires 10/17/2029