Section 445B.3366 - Expiration and extension of operating permit to construct; expiration and renewal of plantwide applicability limitation1. If construction will occur in one phase, an operating permit to construct for a new or modified stationary source expires if construction is not commenced within 18 months after the date of issuance thereof or construction of the facility is delayed for 18 months after initiated. The Director may extend the date on which the construction may be commenced upon a showing that the extension is justified.2. If construction will occur in more than one phase, the projected date of the commencement of construction of each phase of construction must be approved by the Director. An operating permit to construct expires if the initial phase of construction is not commenced within 18 months after the projected date of the commencement of construction approved by the Director. The Director may extend only the date on which the initial phase of construction may be commenced upon a showing that the extension is justified.3. An operating permit to construct issued to a new major stationary source or issued for a major modification to an existing stationary source that is subject to the permitting requirements set forth in 40 C.F.R. § 52.21 is subject to the expiration requirements established in 40 C.F.R. § 52.21(r)(2).4. Except as otherwise provided in this subsection, an operating permit to construct expires if a complete application for a Class I operating permit or modification of an existing Class I operating permit is not submitted within 12 months after the date of initial start-up. The provisions of this subsection do not apply to a Class I operating permit to construct for the approval of a plantwide applicability limitation.5. A plantwide applicability limitation expires at the end of the plantwide applicability limitation effective period in accordance with 40 C.F.R. § 52.21(aa)(9), unless the plantwide applicability limitation is renewed pursuant to subsection 3 of NAC 445B.33637. If the owner or operator is not going to renew the plantwide applicability limitation, the operating permit for the Class I stationary source must be revised to incorporate the redistribution of the emissions allowed by the plantwide applicability limitation that is expiring in accordance with subsection 2 of NAC 445B.33637. For the purposes of this subsection, "plantwide applicability limitation effective period" means the "PAL effective period" as that term is defined in 40 C.F.R. § 52.21(aa)(2)(vii).Nev. Admin. Code § 445B.3366
Added to NAC by Environmental Comm'n by R103-02, eff. 12-17-2002; A by R125-04, 9-24-2004; R139-06, 9-18-2006