Current through Vol. 24-22, December 15, 2024
Section R. 408.10727 - BeltsRule 727.
(1) A belt and pulley that is 7 feet or less above the floor or platform and that is exposed to contact must be guarded pursuant to R 408.10751 to R 408.10754. In a power plant or power-development room, a guardrail system may be used in compliance with General Industry Safety and Health Standard Part 2. "Walking-Working Surfaces," as referenced in R 408.10702.(2) A horizontal belt more than 7 feet above the floor or platform must be guarded for its entire length if located over a passageway or work place pursuant to R 408.10753 and figure 2 contained in subrule (5) of this rule.(3) A passageway between horizontal belts must have a lower run guarded by a platform that is provided with a guardrail system in compliance with General Industry Safety and Health Standard Part 2. "Walking-Working Surfaces," as referenced in R 408.10702, and the upper run guarded pursuant to subrule (2) of this rule.(4) A vertical or inclined belt running over a lower pulley more than 7 feet above the floor or platform and located over a passageway or work place must be guarded pursuant to subrule (2) of this rule.Mich. Admin. Code R. 408.10727
1979 AC; 1982 AACS; 2016 AACS; 2019 MR 11, Eff. 6/11/2019