Mich. Admin. Code R. 408.10726

Current through Vol. 24-22, December 15, 2024
Section R. 408.10726 - Pulley condition and operation

Rule 726.

(1) A pulley with a defect, including, but not limited to, a crack or a piece broken out, shall not be used.
(2) A pulley subject to active corrosive conditions shall be of corrosion-resisting material.
(3) A pulley permanently out of service shall not be allowed to remain on shafting which is in use, unless enclosed with a guard pursuant to R 408.10751 to R 408.10754.
(4) A pulley shall not be operated at more than its designed rim speed.

Mich. Admin. Code R. 408.10726

1979 AC; 1982 AACS