Statutes, codes, and regulations
Louisiana Administrative Code
Title 43 - NATURAL RESOURCESPart XIII - Office of Conservation-Pipeline SafetySubpart 3 - Transportation of Natural Gas or Other Gas by Pipeline: Minimum Safety Standards [49 CFR Part 192]
Chapter 11 - Design of Pipeline Components [49 CFR Part 192 Subpart D]
Section XIII-1159 - Requirements for Design of Pressure Relief and Limiting Devices [49 CFR 192.199]

La. Admin. Code tit. 43 § XIII-1159

Download
PDF
Current through Register Vol. 50, No. 11, November 20, 2024
Section XIII-1159 - Requirements for Design of Pressure Relief and Limiting Devices [49 CFR 192.199]
A. Except for rupture discs, each pressure relief or pressure limiting device must: [ 49 CFR 192.199]
1. be constructed of materials such that the operation of a device will not be impaired by corrosion; [ 49 CFR 192.199(a)]
2. have valves and valve seats that are designed not to stick in a position that will make the device inoperative; [ 49 CFR 192.199(b)]
3. be designed and installed so that it can be readily operated to determine if the valve is free, can be tested to determine the pressure at which it will operate, and can be tested for leakage when in the closed position; [ 49 CFR 192.199(c)]
4. have support made of noncombustible material; [ 49 CFR 192.199(d)]
5. have discharge stacks, vents, or outlet ports designed to prevent accumulation of water, ice, or snow, located where gas can be discharged into the atmosphere without undue hazard; [ 49 CFR 192.199(e)]
6. be designed and installed so that the size of the openings, pipe, and fittings located between the system to be protected and the pressure relieving device, and the size of the vent line, are adequate to prevent hammering of the valve and to prevent impairment of relief capacity; [ 49 CFR 192.199(f)]
7. where installed at a district regulator station to protect a pipeline system from overpressuring, be designed and installed to prevent any single incident such as an explosion in a vault or damage by a vehicle from affecting the operation of both the overpressure protective device and the district regulator; and [ 49 CFR 192.199(g)]
8. except for a valve that will isolate the system under protection from its source of pressure, be designed to prevent unauthorized operation of any stop valve that will make the pressure relief valve or pressure limiting device inoperative. [ 49 CFR 192.199(h)]

La. Admin. Code tit. 43, § XIII-1159

Promulgated by the Department of Natural Resources, Office of Conservation, LR 9:227 (April 1983), amended LR 10:520 (July 1984), LR 30:1239 (June 2004).
AUTHORITY NOTE: Promulgated in accordance with R.S. 30:501 et seq.