La. Admin. Code tit. 42 § I-1919

Current through Register Vol. 50, No. 11, November 20, 2024

Section I-1919 - Machine Repair

A. After the division approves the software and logic board of a machine, it will use the prescribed security seal process to guard against any unauthorized tampering or changes.

B. The division may require and provide an identification sticker to be attached to the logic board and the mechanical meters to verify the parts are assigned to a specific permitted machine.

C. No security seal shall be broken except when authorized by the division and only in the presence of division personnel.

D. Any repair or replacement of a machine's mechanical meter or logic board which requires the breaking of the security seal shall be reported to the division before the seal is broken. At that time, readings of the machine's electronic and mechanical meters must be approved by the division and the initial readings of the electronic and mechanical meters shall be provided to the division before the machine is again placed in operation.

E. The division shall be given access to the machine to reseal the meters and verify their proper operation before the machine can be placed in operation.

F. To assure the integrity, security, and monitoring of machines in service, a permitted machine or any portion thereof may not be substituted or replaced until the replacement machine has been permitted by the division.

La. Admin. Code tit. 42, § I-1919

Promulgated by the Department of Public Safety and Corrections, Office of State Police, LR 17:482 (May 1991).

AUTHORITY NOTE: Adopted in accordance with R.S. 40:1485.4 and R.S. 33:4861.17.