Section 312 IAC 25-4-81 - Underground mining permit applications; operation plan; general requirementsAuthority: IC 14-34-2-1
Affected: IC 14-34; 30 CFR 784.11; 30 CFR 784.30
Sec. 81.
(a) Each application shall contain a description of the mining operations proposed to be conducted within the proposed permit area and the proposed life of the mine area where such information is necessary to demonstrate that reclamation required by IC 14-34 can be accomplished by the applicant. The description shall include, at a minimum, the following: (1) A narrative description of the type and method of coal mining procedures and proposed engineering techniques, anticipated annual and total production of coal, by tonnage, and the major equipment to be used for all aspects of those operations.(2) A narrative explaining the construction, modification, use, maintenance, and removal of the following facilities (unless the retention of such facilities is necessary for a postmining land use as specified in 312 IAC 25-6-128: (A) Dams, embankments, and other impoundments.(B) Overburden and topsoil handling and storage areas and structures.(C) Coal removal, handling, storage, cleaning, and transportation areas and structures.(D) Spoil, coal processing waste, mine development waste, and noncoal waste removal handling, storage, transportation, and disposal areas and structures.(F) Water pollution control facilities.(b) In addition to the requirements listed in subsection (a), each applicant for an underground coal mining and reclamation permit shall submit a description, plans, and drawings for each support facility to be constructed, used, or maintained within the proposed permit area. The plans and drawings shall include a map, appropriate cross sections, design drawings, and specifications sufficient to demonstrate compliance with 312 IAC 25-6-132 for each facility.(c) If an application proposes to mine within a zone of influence, the application must include a typical detailed mine plan to a scale of no greater than one (1) inch equals one hundred (100) feet. The mine plan shall depict the pillar, entry, crosscut, and panel dimensions within the zone of influence.Natural Resources Commission; 312 IAC 25-4-81; filed Jun 21, 2001, 2:53 p.m.: 24 IR 3470, eff Dec 1, 2001; readopted filed May 29, 2007, 9:51 a.m.: 20070613-IR-312070146RFA; readopted filed Sep 19, 2013, 10:12 a.m.: 20131016-IR-312130125RFAReadopted filed 3/26/2019, 3:40 p.m.: 20190424-IR-312190011RFA