EXAMPLE 1: Company H has in operation an approved STC plan for its affected design unit. The plan calls for a 50% reduction in hours for the workers in the affected unit. While the STC plan is in operation, economic conditions for Company H improve. Company H seeks to modify its plan to provide for a 20% reduction in hours for the workers in the affected unit. This proposed change in the percentage of reduction of hours worked falls within the parameters of permitted work reduction set forth in Section 502 of the Act. Such a proposed modification to the plan requires the employer to make a request to the Director for approval of the modification of the STC plan.
EXAMPLE 2: Company J has in operation an approved STC plan for its affected packing unit. The plan calls for a 20% reduction in hours for the workers in the affected unit. While the STC plan is in operation, economic conditions for Company J get worse. Company J seeks to modify its plan to provide for a 50% reduction in hours for the workers in the affected unit. This proposed change in the percentage of reduction of hours worked falls within the parameters of permitted work reduction set forth in Section 502 of the Act. Such a proposed modification to the plan requires the employer to make a request to the Director for approval of the modification of the STC plan.
EXAMPLE 3: Company N has in operation an approved STC plan for its affected parts unit. The plan provides for a 25% reduction in hours worked for the employees in the affected unit. Due to a snowstorm in western states, there is a delay in the shipment of parts to Company N. Company N is informed by its supplier that the delay will last one week. With this information, for the one week of the delay, Company N wishes to reduce the hours of work of its employees in the affected unit by 60%, but by no more than 60%. In this situation, Company N must make a request to the Director for approval to modify the STC plan prior to the change in hours worked.
EXAMPLE 4: Company K has an approved STC plan in operation for its affected factory unit. While the plan is in operation, Company L succeeds to substantially all of the employing enterprises of Company K, which includes the factory at which all of the employees in the affected unit work. The Director receives a request to modify the approved STC plan. Under these circumstances, the Director will require the new employer (Company L) to submit a new application for approval of a plan instead of treating the correspondence as a request to modify an approved plan.
EXAMPLE 1: Company M has in operation an approved STC plan for its affected ironwork unit. Mr. A is a worker in the affected unit. While the STC plan is in operation, Mr. A finds a new job and separates from Company M. The affected unit now has one fewer worker in it than it had at the time of the STC plan approval. Mr. A's departure from Company M does not require the employer to make a request to the Director for approval to modify the STC plan so long as the affected unit has no fewer than 2 workers, and so long as the plan proceeds in operation as it was approved. Nonetheless, the employer shall promptly notify the Director that Mr. A is no longer a participant in the plan.
EXAMPLE 2: Company M has in operation an approved STC plan for its affected ironwork unit. Ms. B is a worker in the affected unit. Company M discharges Ms. B from its employment, alleging that the discharge was for misconduct. Ms. B's discharge is a non-voluntary separation of an affected employee from the affected unit and requires a modification of the plan.
Ill. Admin. Code tit. 56, § 2870.30