49 C.F.R. § 236.1049

Current through November 30, 2024
Section 236.1049 - Training specific to roadway workers
(a)Roadway worker training. Training required under this subpart for a roadway worker shall be integrated into the program of instruction required under part 214, subpart C of this chapter ("Roadway Worker Protection"), consistent with task analysis requirements of § 236.1043 . This training shall provide instruction for roadway workers who provide protection for themselves or roadway work groups.
(b)Training subject areas.
(1) Instruction for roadway workers shall ensure an understanding of the role of processor-based signal and train control equipment in establishing protection for roadway workers and their equipment.
(2) Instruction for all roadway workers working in territories where PTC is required under this subpart shall ensure recognition of processor-based signal and train control equipment on the wayside and an understanding of how to avoid interference with its proper functioning.
(3) Instructions concerning the recognition of system failures and the provision of alternative methods of on-track safety in case the train control system fails, including periodic practical exercises or simulations and operational testing under part 217 of this chapter to ensure the continued capability of roadway workers to be free from the danger of being struck by a moving train or other on-track equipment.

49 C.F.R. §236.1049