Ariz. Admin. Code § 11-1-1215

Current through Register Vol. 30, No. 50, December 13, 2024

Section R11-1-1215 - Scaling or Barring-down

Where manual scaling may be required at a work place, a scaling bar of sufficient length to place the user out of danger of falling material shall be provided. The scaling bar shall be blunt on the end held by the user. Picks or other short tools shall not be used for scaling when their use places the user in danger of falling material.

Ariz. Admin. Code § R11-1-1215

Former Rule 12:15; Former Section R11-1-1215 repealed, new Section R11-1-1215 adopted effective August 18, 1980 (Supp. 80-4).