49 U.S.C. § 30115

Current through P.L. 118-107 (published on www.congress.gov on 11/21/2024)

Section 30115 - Certification of compliance

(a) IN GENERAL.-A manufacturer or distributor of a motor vehicle or motor vehicle equipment shall certify to the distributor or dealer at delivery that the vehicle or equipment complies with applicable motor vehicle safety standards prescribed under this chapter. A person may not issue the certificate if, in exercising reasonable care, the person has reason to know the certificate is false or misleading in a material respect. Certification of a vehicle must be shown by a label or tag permanently fixed to the vehicle. Certification of equipment may be shown by a label or tag on the equipment or on the outside of the container in which the equipment is delivered.

(b) CERTIFICATION LABEL.-In the case of the certification label affixed by an intermediate or final stage manufacturer of a motor vehicle built in more than 1 stage, each intermediate or final stage manufacturer shall certify with respect to each applicable Federal motor vehicle safety standard-

(1) that it has complied with the specifications set forth in the compliance documentation provided by the incomplete motor vehicle manufacturer in accordance with regulations prescribed by the Secretary; or

(2) that it has elected to assume responsibility for compliance with that standard.

If the intermediate or final stage manufacturer elects to assume responsibility for compliance with the standard covered by the documentation provided by an incomplete motor vehicle manufacturer, the intermediate or final stage manufacturer shall notify the incomplete motor vehicle manufacturer in writing within a reasonable time of affixing the certification label. A violation of this subsection shall not be subject to a civil penalty under section 30165.

49 U.S.C. § 30115

Pub. L. 103-272, §1(e), July 5, 1994, 108 Stat. 947; Pub. L. 106-414, §9, Nov. 1, 2000, 114 Stat. 1805.

HISTORICAL AND REVISION NOTE
Revised Section	Source (U.S. Code)	Source (Statutes at Large)
30115	15:1397(a)(1)(C), (E) (related to 15:1403).	Sept. 9, 1966, Pub. L. 89-563, §108(a)(1)(C), (E) (related to §114), 80 Stat. 722; Oct. 27, 1974, Pub. L. 93-492, §103(a)(1)(A), (2)(B), 88 Stat. 1477, 1478.
	15:1403.	Sept. 9, 1966, Pub. L. 89-563, §114, 80 Stat . 726.

The words "fail to issue a certificate required by section 1403 of this title" in 15:1397(a)(1)(C) and the text of 15:1397(a)(1)(E) (related to 15:1403) are omitted as surplus. The word "certify" is substituted for "furnish . . . the certification" in 15:1403 to eliminate unnecessary words. The words "the time of" and "of such vehicle or equipment by such manufacturer or distributor" are omitted as surplus. The words "prescribed under this chapter" are added for clarity. The word "reasonable" is substituted for "due" in 15:1397(a)(1)(C) for consistency in the revised title. The words "to the effect that a motor vehicle or item of motor vehicle equipment conforms to all applicable Federal motor vehicle safety standards" are omitted because of the restatement. The words "shown by" are substituted for "in the form of" in 15:1403 for clarity.

EDITORIAL NOTES

AMENDMENTS2000- Pub. L. 106-414 designated existing provisions as subsec. (a), inserted heading, and added subsec. (b).

STATUTORY NOTES AND RELATED SUBSIDIARIES

FOLLOW-UP REPORT Pub. L. 106-414, §16, Nov. 1, 2000, 114 Stat. 1808, provided that, by one year after Nov. 1, 2000, the Secretary of Transportation would report to Congress on the implementation of the 2000 amendments.

dealer: "dealer" means a person selling and distributing new motor vehicles or motor vehicle equipment primarily to purchasers that in good faith purchase the vehicles or equipment other than for resale.
distributor: "distributor" means a person primarily selling and distributing motor vehicles or motor vehicle equipment for resale.
manufacturer: "manufacturer" means a person-(A) manufacturing or assembling motor vehicles or motor vehicle equipment; or(B) importing motor vehicles or motor vehicle equipment for resale.
motor vehicle equipment: "motor vehicle equipment" means-(A) any system, part, or component of a motor vehicle as originally manufactured;(B) any similar part or component manufactured or sold for replacement or improvement of a system, part, or component, or as an accessory or addition to a motor vehicle; or(C) any device or an article or apparel, including a motorcycle helmet and excluding medicine or eyeglasses prescribed by a licensed practitioner, that-(i) is not a system, part, or component of a motor vehicle; and(ii) is manufactured, sold, delivered, or offered to be sold for use on public streets, roads, and highways with the apparent purpose of safeguarding users of motor vehicles against risk of accident, injury, or death.
motor vehicle safety standard: "motor vehicle safety standard" means a minimum standard for motor vehicle or motor vehicle equipment performance.
motor vehicle safety: "motor vehicle safety" means the performance of a motor vehicle or motor vehicle equipment in a way that protects the public against unreasonable risk of accidents occurring because of the design, construction, or performance of a motor vehicle, and against unreasonable risk of death or injury in an accident, and includes nonoperational safety of a motor vehicle.
motor vehicle: "motor vehicle" means a vehicle driven or drawn by mechanical power and manufactured primarily for use on public streets, roads, and highways, but does not include a vehicle operated only on a rail line.