Fed. R. App. P. 32

Current through P.L. 118-82 (published on www.congress.gov on 09/20/2024)
Rule 32 - Form of Briefs, Appendices, and Other Papers
(a) FORM OF A BRIEF.
(1)Reproduction.
(A) A brief may be reproduced by any process that yields a clear black image on light paper. The paper must be opaque and unglazed. Only one side of the paper may be used.
(B) Text must be reproduced with a clarity that equals or exceeds the output of a laser printer.
(C) Photographs, illustrations, and tables may be reproduced by any method that results in a good copy of the original; a glossy finish is acceptable if the original is glossy.
(2)Cover. Except for filings by unrepresented parties, the cover of the appellant's brief must be blue; the appellee's, red; an intervenor's or amicus curiae's, green; any reply brief, gray; and any supplemental brief, tan. The front cover of a brief must contain:
(A) the number of the case centered at the top;
(B) the name of the court;
(C) the title of the case (see Rule 12(a));
(D) the nature of the proceeding (e.g., Appeal, Petition for Review) and the name of the court, agency, or board below;
(E) the title of the brief, identifying the party or parties for whom the brief is filed; and
(F) the name, office address, and telephone number of counsel representing the party for whom the brief is filed.
(3)Binding. The brief must be bound in any manner that is secure, does not obscure the text, and permits the brief to lie reasonably flat when open.
(4)Paper Size, Line Spacing, and Margins. The brief must be on 8½ by 11 inch paper. The text must be double-spaced, but quotations more than two lines long may be indented and single-spaced. Headings and footnotes may be single-spaced. Margins must be at least one inch on all four sides. Page numbers may be placed in the margins, but no text may appear there.
(5)Typeface. Either a proportionally spaced or a monospaced face may be used.
(A) A proportionally spaced face must include serifs, but sans-serif type may be used in headings and captions. A proportionally spaced face must be 14-point or larger.
(B) A monospaced face may not contain more than 10½ characters per inch.
(6)Type Styles. A brief must be set in a plain, roman style, although italics or boldface may be used for emphasis. Case names must be italicized or underlined.
(7)Length.
(A)Page Limitation. A principal brief may not exceed 30 pages, or a reply brief 15 pages, unless it complies with Rule 32(a)(7)(B).
(B)Type-Volume Limitation.
(i) A principal brief is acceptable if it:

* contains no more than 13,000 words; or

* uses a monospaced face and contains no more than 1,300 lines of text.

(ii) A reply brief is acceptable if it contains no more than half of the type volume specified in Rule 32(a)(7)(B)(i).
(b) FORM OF AN APPENDIX. An appendix must comply with Rule 32(a)(1), (2), (3), and (4), with the following exceptions:
(1) The cover of a separately bound appendix must be white.
(2) An appendix may include a legible photocopy of any document found in the record or of a printed judicial or agency decision.
(3) When necessary to facilitate inclusion of odd-sized documents such as technical drawings, an appendix may be a size other than 8½ by 11 inches, and need not lie reasonably flat when opened.
(c) FORM OF OTHER PAPERS.
(1)Motion. The form of a motion is governed by Rule 27(d).
(2)Other Papers. Any other paper, including a petition for panel rehearing and a petition for hearing or rehearing en banc, and any response to such a petition, must be reproduced in the manner prescribed by Rule 32(a), with the following exceptions:
(A) A cover is not necessary if the caption and signature page of the paper together contain the information required by Rule 32(a)(2). If a cover is used, it must be white.
(B) Rule 32(a)(7) does not apply.
(d) SIGNATURE. Every brief, motion, or other paper filed with the court must be signed by the party filing the paper or, if the party is represented, by one of the party's attorneys.
(e) LOCAL VARIATION. Every court of appeals must accept documents that comply with the form requirements of this rule and the length limits set by these rules. By local rule or order in a particular case, a court of appeals may accept documents that do not meet all the form requirements of this rule or the length limits set by these rules.
(f) ITEMS EXCLUDED FROM LENGTH. In computing any length limit, headings, footnotes, and quotations count toward the limit but the following items do not:

* cover page;

* disclosure statement;

* table of contents;

* table of citations;

* statement regarding oral argument;

* addendum containing statutes, rules, or regulations;

* certificate of counsel;

* signature block;

* proof of service; and

* any item specifically excluded by these rules or by local rule.

(g) CERTIFICATE OF COMPLIANCE.
(1)Briefs and Papers That Require a Certificate. A brief submitted under Rules 28.1(e)(2), 29(b)(4), or 32(a)(7)(B)-and a paper submitted under Rules 5(c)(1), 21(d)(1), 27(d)(2)(A), 27(d)(2)(C), 35(b)(2)(A), or 40(b)(1)-must include a certificate by the attorney, or an unrepresented party, that the document complies with the type-volume limitation. The person preparing the certificate may rely on the word or line count of the word-processing system used to prepare the document. The certificate must state the number of words-or the number of lines of monospaced type-in the document.
(2)Acceptable Form. Form 6 in the Appendix of Forms meets the requirements for a certificate of compliance.

28 APPENDIX U.S.C. § 32

As amended Apr. 24, 1998, eff. Dec. 1, 1998; Apr. 29, 2002, eff. Dec. 1, 2002; Apr. 25, 2005, eff. Dec. 1, 2005; Apr. 28, 2016, eff. Dec. 1, 2016; Apr. 25, 2019, eff. Dec. 1, 2019.

NOTES OF ADVISORY COMMITTEE ON RULES-1967Only two methods of printing are now generally recognized by the circuits-standard typographic printing and the offset duplicating process (multilith). A third, mimeographing, is permitted in the Fifth Circuit. The District of Columbia, Ninth, and Tenth Circuits permit records to be reproduced by copying processes. The Committee feels that recent and impending advances in the arts of duplicating and copying warrant experimentation with less costly forms of reproduction than those now generally authorized. The proposed rule permits, in effect, the use of any process other than the carbon copy process which produces a clean, readable page. What constitutes such is left in first instance to the parties and ultimately to the court to determine. The final sentence of the first paragraph of subdivision (a) is added to allow the use of multilith, mimeograph, or other forms of copies of the reporter's original transcript whenever such are available.

COMMITTEE NOTES ON RULES-1998 AMENDMENT In addition to amending Rule 32 to conform to uniform drafting standards, several substantive amendments are made. The Advisory Committee had been working on substantive amendments to Rule 32 for some time prior to completion of this larger project.Subdivison (a). Form of a Brief.Paragraph (a)(1). Reproduction.The rule permits the use of "light" paper, not just "white" paper. Cream and buff colored paper, including recycled paper, are acceptable. The rule permits printing on only one side of the paper. Although some argue that paper could be saved by allowing double-sided printing, others argue that in order to preserve legibility a heavier weight paper would be needed, resulting in little, if any, paper saving. In addition, the blank sides of a brief are commonly used by judges and their clerks for making notes about the case. Because photocopying is inexpensive and widely available and because use of carbon paper is now very rare, all references to the use of carbon copies have been deleted.The rule requires that the text be reproduced with a clarity that equals or exceeds the output of a laser printer. That means that the method used must have a print resolution of 300 dots per inch (dpi) or more. This will ensure the legibility of the brief. A brief produced by a typewriter or a daisy wheel printer, as well as one produced by a laser printer, has a print resolution of 300 dpi or more. But a brief produced by a dot-matrix printer, fax machine, or portable printer that uses heat or dye transfer methods does not. Some ink jet printers are 300 dpi or more, but some are 216 dpi and would not be sufficient.Photographs, illustrations, and tables may be reproduced by any method that results in a good copy.Paragraph (a)(2). Cover.The rule requires that the number of the case be centered at the top of the front cover of a brief. This will aid in identification of the brief. The idea was drawn from a local rule. The rule also requires that the title of the brief identify the party or parties on whose behalf the brief is filed. When there are multiple appellants or appellees, the information is necessary to the court. If, however, the brief is filed on behalf of all appellants or appellees, it may so indicate. Further, it may be possible to identify the class of parties on whose behalf the brief is filed. Otherwise, it may be necessary to name each party. The rule also requires that attorney's telephone numbers appear on the front cover of a brief or appendix. Paragraph (a)(3). Binding.The rule requires a brief to be bound in any manner that is secure, does not obscure the text, and that permits the brief to lie reasonably flat when open. Many judges and most court employees do much of their work at computer keyboards and a brief that lies flat when open is significantly more convenient. One circuit already has such a requirement and another states a preference for it. While a spiral binding would comply with this requirement, it is not intended to be the exclusive method of binding. Stapling a brief at the upper left-hand corner also satisfies this requirement as long as it is sufficiently secure. Paragraph (a)(4). Paper Size, Line Spacing, and Margins. The provisions for pamphlet-size briefs are deleted because their use is so rare. If a circuit wishes to authorize their use, it has authority to do so under subdivision (d) of this rule.Paragraph (a)(5). Typeface.This paragraph and the next one, governing type style, are new. The existing rule simply states that a brief produced by the standard typographic process must be printed in at least 11 point type, or if produced in any other manner, the lines of text must be double spaced. Today few briefs are produced by commercial printers or by typewriters; most are produced on and printed by computer. The availability of computer fonts in a variety of sizes and styles has given rise to local rules limiting type styles. The Advisory Committee believes that some standards are needed both to ensure that all litigants have an equal opportunity to present their material and to ensure that the briefs are easily legible.With regard to typeface there are two options: proportionally-spaced typeface or monospaced typeface.A proportionally-spaced typeface gives a different amount of horizontal space to characters depending upon the width of the character. A capital "M" is given more horizontal space than a lower case "i." The rule requires that a proportionally-spaced typeface have serifs. Serifs are small horizontal or vertical strokes at the ends of the lines that make up the letters and numbers. Studies have shown that long passages of serif type are easier to read and comprehend than long passages of sans-serif type. The rule accordingly limits the principal sections of submissions to serif type, although sans-serif type may be used in headings and captions. This is the same approach magazines, newspapers, and commercial printers take. Look at a professionally printed brief; you will find sans-serif type confined to captions, if it is used at all. The next line shows two characters enlarged for detail. The first has serifs, the second does not.