Section 383.022 - Form and Procedure(a) Bonds under this chapter must be authorized by resolution. The bonds must: (1) be signed by the presiding officer or assistant presiding officer of the governing body;(2) be attested by the secretary of the governing body; and(3) have the seal of the issuer impressed, printed, or lithographed on the bonds.(b) The bonds may have the characteristics and bear the designation determined by the governing body of the issuer, except that the designation must include for each control facility to be financed with the bonds:(1) the name of each person using or purchasing the control facility;(2) the name of each person guaranteeing the contractual obligations of each person using or purchasing the control facility; or(3) a statement, if applicable, that a group of persons will be using or purchasing the control facility.(c) The governing body may authorize a required signature to be printed or lithographed on the bonds. The issuer may adopt or use the signature of a person who has been an officer, regardless of whether the person is an officer when the bonds are delivered to a purchaser.Tex. Health and Safety Code § 383.022
Acts 1989, 71st Leg., ch. 678, Sec. 1, eff. 9/1/1989.