If a fault exists within two and one-half miles from the proposed or existing wellbore of a Class I injection well or the area within the cone of influence, whichever is greater, or if a fault exists within 3,000 feet of a proposed hazardous waste management facility other than a Class I injection well or of a capacity expansion of an existing hazardous waste management facility, the burden is on the applicant, unless previously demonstrated to the commission or to the United States Environmental Protection Agency, to show:
(1) in the case of Class I injection wells, that the fault is not sufficiently transmissive or vertically extensive to allow migration of hazardous constituents out of the injection zone; or(2) in the case of a proposed hazardous waste management facility other than a Class I injection well or for a capacity expansion of an existing hazardous waste management facility, that:(A) the fault has not had displacement within Holocene time, or if faults have had displacement within Holocene time, that no such faults pass within 200 feet of the portion of the surface facility where treatment, storage, or disposal of hazardous wastes will be conducted; and(B) the fault will not result in structural instability of the surface facility or provide for groundwater movement to the extent that there is endangerment to human health or the environment.Tex. Health and Safety Code § 361.1011
Added by Acts 1991, 72nd Leg., ch. 296, Sec. 1.16, eff. 6/7/1991.