Current through Laws 2024, c. 453.
Section 687.1 - Circuit engineering districtsA. The board of county commissioners of any county in this state may create a circuit engineering district with any other county or counties. The objectives of the circuit engineering district shall be:1. To allow county governments to make the most efficient use of their powers by enabling them to cooperate with each other and other units of government on a basis of mutual advantage and thereby to provide services and facilities in a manner and pursuant to forms of governmental organization that will accord best with geographic, economic, population and other factors influencing the needs and development of county government;2. To provide research and research support to county government;3. To provide assistance to county governments in performing the functions delegated by law including, but not limited to, the operation of road maintenance, construction, inspection, and equipment purchases and management;4. To conduct public discussion groups, forums, panels, lectures, and other similar programs;5. To present courses of instruction and education;6. To obtain, develop and present scientific and all other types of information relative to the operation of the public transportation system in this state;7. For long-range planning and growth of the transportation system within the circuit engineering district and other circuit engineering districts within this state; and8. To provide services to counties in a coordinated manner that will improve the quality of the transportation system and be cost effective.B. The authority of the circuit engineering district shall be as follows:1. To comply with and carry out the provisions of the Interlocal Cooperation Act;2. To advise and assist its members with how to implement and make an effective transportation plan for the best interest of each member of the circuit engineering district;3. To prepare such programs of research as may be necessary and advisable in carrying out its purposes;4. To contract for services with persons, firms or units of government to carry out the purposes of the circuit engineering district;5. To provide periodic reports for the circuit engineering district or for its members as may be required by federal or state legislation or regulations pertaining thereto, and as are within the scope and range of the purpose of the circuit engineering district;6. To acquire and hold property for its use and to incur expenses to carry out its functions;7. To receive gifts, contributions and donations to carry out the purposes for which it is formed;8. To assess its members for the services rendered in carrying out its functions;9. To apply for, contract for, administer, receive and expend funds or grants from any participating member, the State of Oklahoma, the federal government, or any other source; and10. To publish studies in connection with its work which may be of benefit to its members or other agencies within and outside of the circuit engineering district.C. Circuit engineering districts may, by affirmative vote of their board, determine that the association representing the county commissioners of Oklahoma be designated to negotiate for services, required by law or necessity, on behalf of the circuit engineering districts.D. The State Auditor and Inspector shall perform an operational audit of each circuit engineering district upon completion of each fiscal year. The State Auditor and Inspector is authorized to promulgate rules outlining the necessary reporting requirements and forms for each circuit engineering district to ensure compliance.E. The board of directors may employ an attorney to provide legal research, advice and opinions on contracts and other matters which may come before the board of directors.F. Circuit engineering districts may participate in the County Road Machinery and Equipment Revolving Fund pursuant to the provisions of Section 302.1 of this title.G. Circuit engineering districts are authorized to organize a statewide board consisting of the chairpersons duly elected by each of their respective circuit engineering districts. The statewide board organized pursuant to this section shall: 1. Have the power to conduct business, including the development of policies and procedures, incur expenses, and contract for services so long as such business furthers the provisions of 687.1 et seq. of this title;2. Coordinate activities between circuit engineering districts;3. Administer the Statewide Circuit Engineering District Revolving Fund, created pursuant to Section 687.2 of this title; and4. Have authority to promulgate rules to carry out the provisions of 687.1 et seq. of this title.H. A circuit engineering district created pursuant to this section shall be deemed a political subdivision of the state.I. A district may hire up to one registered professional engineer per three counties within each circuit engineering district.Okla. Stat. tit. 69, § 687.1
Amended by Laws 2020 , c. 143, s. 1, eff. 7/1/2020.Amended by Laws 2013 , c. 193, s. 1, eff. 7/1/2013.Added by Laws 1992, HB 2254, c. 80, § 12, emerg. eff. 7/1/1992; Amended by Laws 1998 , HB 3275, c. 94, §1, emerg. eff. 7/1/1998; Amended by Laws 2001 , HB 1772, c. 117, §3, eff. 11/1/2001; Amended by Laws 2007 , SB 378, c. 113, §1, emerg. eff. 7/1/2007; Amended by Laws 2010 , HB 2895, c. 134, §2, eff. 11/1/2010.