Section 701.768 - Establishment and amendment of minimum standards for regulated appliances and methods for verifying compliance; effective date; prohibition on sale, lease, rental or installation for compensation of new noncompliant appliances; regulations1. Not later than October 1, 2022, the Director shall adopt regulations establishing minimum standards of energy efficiency for regulated appliances and methods for verifying whether a regulated appliance complies with those standards.2. On and after July 1, 2023, a new regulated appliance may not be sold, leased or rented in this State, or offered for sale, lease or rent in this State, unless it meets or exceeds the minimum standards of energy efficiency established by the Director pursuant to subsection 1. If the Director amends the regulations adopted pursuant to subsection 1 to establish more stringent standards of energy efficiency for regulated appliances, the Director shall establish an effective date for such amended regulations which must be not earlier than 365 days after the date on which the amended regulations are filed with the Secretary of State pursuant to NRS 233B.070.3. On and after January 1, 2024, a new regulated appliance may not be installed for compensation in this State unless it meets or exceeds the minimum standards of energy efficiency established by the Director pursuant to subsection 1. If the Director amends the regulations adopted pursuant to subsection 1 to establish more stringent standards of energy efficiency for new regulated appliances, beginning 1 year after the amended regulations are filed with the Secretary of State pursuant to NRS 233B.070, it shall be unlawful to install for compensation in this State a new regulated appliance that does not meet or exceed the more stringent standards of energy efficiency adopted by the Director.4. The minimum standards of energy efficiency for regulated appliances adopted by the Director pursuant to subsection 1 must meet or exceed the following standards: (a) An air purifier which is not an industrial air purifier must meet the following requirements as measured in accordance with version 2.0 of the "ENERGY STAR Product Specification for Room Air Cleaners" adopted by the United States Environmental Protection Agency: (1) The clean air delivery rate for smoke must be not less than 30 cubic feet per minute;(2) For models with a clean air delivery rate for smoke that is less than 100 cubic feet per minute, the clean air delivery rate per watt for smoke must be not less than 1.7 cubic feet per minute;(3) For models with a clean air delivery rate for smoke that is 100 or more but less than 150 cubic feet per minute, the clean air delivery rate per watt for smoke must be not less than 1.9 cubic feet per minute;(4) For models with a clean air delivery rate for smoke that is 150 or more cubic feet per minute, the clean air delivery rate per watt for smoke must be not less than 2.0 cubic feet per minute;(5) For ozone-emitting models, the measured ozone must be not more than 50 parts per billion;(6) For models with a wireless fidelity network connection enabled by default when shipped, the energy consumed when in partial on mode power must be not more than 2 watts; and(7) For models without a wireless fidelity network connection enabled by default when shipped, the energy consumed when in partial on mode must be not more than 1 watt.(b) Commercial dishwashers included in the scope of version 2.0 of the "ENERGY STAR Program Requirements Product Specification for Commercial Dishwashers" must meet the eligibility criteria of that specification.(c) Commercial fryers included in the scope of version 2.0 of the "ENERGY STAR Program Requirements Product Specification for Commercial Fryers" must meet the criteria of that specification.(d) Commercial hot food holding cabinets included in the scope of version 2.0 of the "ENERGY STAR Program Requirements Product Specification for Commercial Hot Food Holding Cabinets" must meet the criteria of that specification.(e) Commercial ovens included in the scope of version 2.2 of the "ENERGY STAR Program Requirements Product Specification for Commercial Ovens" must meet the criteria of that specification.(f) Commercial steam cookers included in the scope of version 1.2 of the "ENERGY STAR Program Requirements Product Specification for Commercial Steam Cookers" must meet the criteria of that specification.(g) Computers and computer monitors must meet the requirements set forth in section 1605.3(v) of Title 20 of the California Code of Regulations as in effect on January 1, 2020, and the test procedures for computers and computer monitors adopted by the Director must be in accordance with the testing method prescribed in section 1604(v) of Title 20 of the California Code of Regulations as in effect on January 1, 2020, except that the Director may elect to amend the test procedure to reflect changes to section 1604(v) of Title 20 of the California Code of Regulations that occur after January 1, 2020.(h) Electric vehicle supply equipment included in the scope of version 1.0 of the "ENERGY STAR Program Requirements for Electric Vehicle Supply Equipment" must meet the eligibility criteria of that specification.(i) Gas fireplaces must: (1) Be capable of automatically extinguishing any pilot flame when the main gas burner flame is extinguished.(2) Prevent any ignition source for the main gas burner flame from operating continuously for more than 7 days.(3) If the gas fireplace is a heating gas fireplace, have a fireplace efficiency greater than or equal to 50 percent when tested in accordance with Standard No. P.4.1-15 of the Canadian Standards Association, "Testing Method for Measuring Annual Fireplace Efficiency."(j) High color rendering index fluorescent lamps, cold temperature fluorescent lamps and impact-resistant fluorescent lamps must meet the minimum efficacy requirements contained in 10 C.F.R. § 430.32(n)(4), as in effect on January 1, 2020, as measured in accordance with 10 C.F.R. Part 430, subpart B, Appendix R, "Uniform Test Method for Measuring Average Lamp Efficacy (LE), Color Rendering Index (CRI), and Correlated Color Temperature (CCT) of Electric Lamps," as in effect on January 1, 2020.(k) Portable electric spas must meet the requirements of the "American National Standard for Portable Electric Spa Energy Efficiency," ANSI/APSP/ICC 14-2019 of the Association of Pool and Spa Professionals.(l) In-line residential ventilating fans must have a fan motor efficacy of not less than 2.8 cubic feet per minute per watt.(m) Residential ventilating fans other than in-line residential ventilating fans must have a fan motor efficacy of not less than 1.4 cubic feet per minute per watt for airflows less than 90 cubic feet per minute and not less than 2.8 cubic feet per minute per watt for other airflows when tested in accordance with HVI Publication 916, "HVI Airflow Test Procedure," of the Home Ventilating Institute.(n) Water coolers included in the scope of version 2.0 of the "ENERGY STAR Program Requirements Product Specification for Water Coolers" must have an on mode with no water draw energy consumption of the following values as measured in accordance with the test requirements of that specification:(1) Not more than 0.16 kilowatt-hours per day for cold only water coolers and cook and cold water coolers;(2) Not more than 0.87 kilowatt-hours per day for storage-type hot and cold water coolers; and(3) Not more than 0.18 kilowatt-hours per day for on-demand hot and cold water coolers.Added to NRS by 2021, 2201Added by 2021, Ch. 368,§31, eff. 7/1/2021.