Section 293B.155 - Procedure for conducting tests; inspection of results of test1. The tests prescribed by NRS 293B.150 and 293B.165 must be conducted by processing a preaudited group of logic and accuracy test ballots so voted or marked as to record a predetermined number of valid votes for each candidate and on each measure, and must include for each office one or more ballots which have votes in excess of the number allowed by law in order to test the ability of the mechanical recording device or the automatic tabulating equipment and programs to reject those votes.2. If any error is detected, the cause therefor must be ascertained and corrected and an errorless count must be made before the mechanical recording device or the automatic tabulating equipment and programs are approved.3. When satisfied with the accuracy of the mechanical recording device or automatic tabulating equipment and computer program, the accuracy certification board and the county or city clerk shall date and sign all reports, and seal the program, if any, and the reports and all test material in an appropriate container. The container must be kept sealed by the clerk.4. Except as otherwise provided in this subsection, the contents of such a sealed container are not subject to the inspection of anyone except in the case of a contested election, and then only by the judge, body or board before whom the election is being contested, or by the parties to the contest, jointly, pursuant to an order of that judge, body or board. For the period set forth in NRS 293.413 during which a candidate may file a statement of contest, the results of the test must be made available in the clerk's office for public inspection.Added to NRS by 1975, 1526; A 1981, 1743; 1987, 358; 1989, 2171; 1995, 2788; 1999, 3554; 2007, 1167, 2606Added to NRS by 1975, 1526; A 1981, 1743; 1987, 358; 1989, 2171; 1995, 2788; 1999, 3554; 2007, 1167, 2606