Section 415 ILCS 165/15 - Labeling requirements(a) Except as provided in subsections (b), (c), (d), and (f), a covered product manufactured on or after July 1, 2022 shall be labeled clearly and conspicuously in adherence to the following labeling requirements: (1) In the case of cylindrical or near cylindrical packaging intended to dispense individual wipes, a covered entity shall comply with one of the following options:(A) Place the symbol and label notice on the principal display panel in a location reasonably viewable each time a wipe is dispensed.(B) Place the symbol on the principal display panel and either the symbol or label notice, or the symbol and label notice in combination, on the flip lid, subject to the following:(i) If the label notice does not appear on the flip lid, the label notice shall be placed on the principal display panel.(ii) The symbol or label notice, or the symbol and label notice in combination, on the flip lid may be embossed, and in that case are not required to comply with paragraph (6).(iii) The symbol or label notice, or the symbol and label notice in combination, on the flip lid shall cover a minimum of 8% of the surface area of the flip lid.(2) In the case of flexible film packaging intended to dispense individual wipes, a covered entity shall place the symbol on the principal display panel and dispensing side panel and shall place the label notice on either the principal display panel or dispensing side panel in a prominent location reasonably visible to the user each time a wipe is dispensed. If the principal display panel is on the dispensing side of the package, 2 symbols are not required.(3) In the case of refillable tubs or other rigid packaging intended to dispense individual wipes and be reused by the consumer for that purpose, a covered entity shall place the symbol and label notice on the principal display panel in a prominent location reasonably visible to the user each time a wipe is dispensed.(4) In the case of packaging not intended to dispense individual wipes, a covered entity shall place the symbol and label notice on the principal display panel in a prominent and reasonably visible location.(5) A covered entity shall ensure that the packaging seams, folds, or other package design elements do not obscure the symbol or the label notice.(6) A covered entity shall ensure that the symbol and label notice have sufficiently high contrast with the immediate background of the packaging to render it likely to be seen and read by the ordinary individual under customary conditions of purchase and use.(b) For covered products sold in bulk at retail, both the outer package visible at retail and the individual packages contained within shall comply with the labeling requirements in subsection (a) applicable to the particular packaging types, except the following:(1) Individual packages contained within the outer package that are not intended to dispense individual wipes and contain no retail labeling.(2) Outer packages that do not obscure the symbol and label notice on individual packages contained within.(c) If a covered product is provided within the same packaging as another consumer product for use in combination with the other consumer product, the outside retail packaging of the other consumer product does not need to comply with the labeling requirements of subsection (a).(d) If a covered product is provided within the same package as another consumer product for use in combination with the other product and is in a package smaller than 3 inches by 3 inches, the covered entity of the covered product may comply with the requirements of subsection (a) by placing the symbol and label notice in a prominent location reasonably visible to the user of the covered product.(e) A covered entity, directly or through a corporation, partnership, subsidiary, division, trade name, or association in connection to the manufacturing, labeling, packaging, advertising, promotion, offering for sale, sale, or distribution of a covered product, shall not make any representation, in any manner, expressly or by implication, including through the use of a product name, endorsement, depiction, illustration, trademark, or trade name, about the flushable attributes, flushable benefits, flushable performance, or flushable efficacy of a covered product.(f) If a covered product is required to be registered by the United States Environmental Protection Agency under the Federal Insecticide, Fungicide, and Rodenticide Act ( 7 U.S.C. 136 et seq.) and the Illinois Department of Agriculture under the Illinois Pesticide Act, then the covered entity shall submit a label compliant with the labeling requirements of subsection (a) no later than July 1, 2023 to the United States Environmental Protection Agency. If the United States Environmental Protection Agency or the Illinois Department of Agriculture does not approve a product label that otherwise complies with the labeling requirements of subsection (a), the covered entity shall use a label with as many of the requirements of this Section as the relevant agency has approved.
(g) A covered entity may include on a covered product words or phrases in addition to those required for the label notice if the words or phrases are consistent with the purposes of this Section.Added by P.A. 102-0286,§ 15, eff. 7/1/2022.