Section 50 ILCS 750/15.8a - (Section scheduled to be repealed on 12/31/2025) Configuration of MLTS(a) An entity engaged in the business of installing an MLTS may not install such a system unless it is configured so that it is capable of being programmed with and conveying the dispatchable location of the 9-1-1 caller consistent with the following: (1) An on-premises, fixed telephone associated with an MLTS shall provide an automated dispatchable location.(2) An on-premises, non-fixed device associated with an MLTS shall provide an automated dispatchable location, if technically feasible; otherwise, it shall provide a dispatchable location based on end-user manual update or alternative location information.(3) An off-premises device associated with an MLTS shall provide an automated dispatchable location, if technically feasible; otherwise, it shall provide dispatchable location based on end-user manual update or enhanced location information, which may be coordinate-based and shall provide the best available location that can be obtained from any available technology or combination of technologies at reasonable cost.(b) An entity engaged in the business of manufacturing, importing, selling, or leasing MLTS may not manufacture or import for use, or sell or lease or offer to sell or lease, an MLTS unless such system has the capability, after proper installation in accordance with subsections (b) and (c) of Section 15.6c and this Section, of providing the dispatchable location of the 9-1-1 caller.(c) Alternative location information may be coordinate-based, and it must be sufficient to identify the caller's civic address and approximate in-building location, including floor level, in large buildings.(d) A person engaged in the business of managing or operating an MLTS may not manage or operate such a system unless it is configured such that the dispatchable location of the 9-1-1 caller is consistent with paragraphs (1), (2), and (3) of subsection (a).Added by P.A. 102-0983,§ 5, eff. 5/27/2022.