Conn. Gen. Stat. § 20-330

Current with legislation from the 2024 Regular and Special Sessions.

Section 20-330 - Definitions

As used in this chapter:

(1) "Contractor" means any person regularly offering to the general public services of such person or such person's employees in the field of electrical work, plumbing and piping work, solar work, heating, piping, cooling and sheet metal work, fire protection sprinkler systems work, elevator installation, repair and maintenance work, irrigation work, automotive glass work or flat glass work, as defined in this section;

(2) "Electrical work" means the installation, erection, maintenance, inspection, testing, alteration or repair of any wire, cable, conduit, busway, raceway, support, insulator, conductor, appliance, apparatus, fixture or equipment that generates, transforms, transmits or uses electrical energy for light, heat, power or other purposes, but does not include low voltage wiring, not exceeding twenty-four volts, used within a lawn sprinkler system;

(3) "Plumbing and piping work" means the installation, repair, replacement, alteration, maintenance, inspection or testing of gas, water and associated fixtures, tubing and piping mains and branch lines up to and including the closest valve to a machine or equipment used in the manufacturing process, laboratory equipment, sanitary equipment, other than subsurface sewage disposal systems, fire prevention apparatus, all water systems for human usage, sewage treatment facilities and all associated fittings within a building and includes lateral storm and sanitary lines from buildings to the mains, process piping, swimming pools and pumping equipment, and includes making connections to back flow prevention devices, and includes low voltage wiring, not exceeding twenty-four volts, used within a lawn sprinkler system, but does not include (A) solar thermal work performed pursuant to a certificate held as provided in section 20-334g, except for the repair of those portions of a solar hot water heating system that include the basic domestic hot water tank and the tie-in to the potable water system, (B) the installation, repair, replacement, alteration, maintenance, inspection or testing of fire prevention apparatus within a structure, except for standpipes that are not connected to sprinkler systems, (C) medical gas and vacuum systems work, and (D) millwright work. For the purposes of this subdivision, "process piping" means piping or tubing that conveys liquid or gas that is used directly in the production of a chemical or a product for human consumption;

(4) "Solar thermal work" means the installation, erection, repair, replacement, alteration, maintenance, inspection or testing of active, passive and hybrid solar systems that directly convert ambient energy into heat or convey, store or distribute such ambient energy;

(5) "Heating, piping and cooling work" means (A) the installation, repair, replacement, maintenance, inspection, testing or alteration of any apparatus for piping, appliances, devices or accessories for heating systems, including sheet metal work, (B) the installation, repair, replacement, maintenance, inspection, testing or alteration of air conditioning and refrigeration systems, boilers, including apparatus and piping for the generation or conveyance of steam and associated pumping equipment and process piping and the installation of tubing and piping mains and branch lines up to and including the closest valve to a machine or equipment used in the manufacturing process and onsite testing and balancing of hydronic, steam and combustion air, but excluding millwright work, and (C) on-site operation, by manipulating, adjusting or controlling, with sufficient technical knowledge, as determined by the commissioner, (i) heating systems with a steam or water boiler maximum operating pressure of fifteen pounds per square inch gauge or greater, or (ii) air conditioning or refrigeration systems with an aggregate of more than fifty horsepower or kilowatt equivalency of fifty horsepower or of two hundred pounds of refrigerant. Heating, piping and cooling work does not include solar thermal work performed pursuant to a certificate held as provided in section 20-334g, or medical gas and vacuum systems work or the passive monitoring of heating, air conditioning or refrigeration systems. For the purposes of this subdivision, "process piping" means piping or tubing that conveys liquid or gas that is used directly in the production of a chemical or a product for human consumption;

(6) "Apprentice" means any person registered with the Labor Department for the purpose of learning a skilled trade;

(7) "Elevator installation, repair and maintenance work" means the installation, erection, maintenance, inspection, testing and repair of all types of elevators, dumb waiters, escalators, and moving walks and all mechanical equipment, fittings, associated piping and wiring from a source of supply brought to the equipment room by an unlimited electrical contractor for all types of machines used to hoist or convey persons or materials, but does not include temporary hoisting machines used for hoisting materials in connection with any construction job or project, provided "elevator inspection" includes the visual examination of an elevator system or portion of a system, with or without the disassembly or removal of component parts;

(8) "Elevator maintenance" means the lubrication, inspection, testing and replacement of controls, hoist way and car parts;

(9) "Fire protection sprinkler systems work" means the layout, on-site fabrication, installation, alteration, maintenance, inspection, testing or repair of any automatic or manual sprinkler system designed for the protection of the interior or exterior of a building or structure from fire, or any piping or tubing and appurtenances and equipment pertaining to such system including overhead and underground water mains, fire hydrants and hydrant mains, standpipes and hose connections to sprinkler systems, sprinkler tank heaters excluding electrical wiring, air lines and thermal systems used in connection with sprinkler and alarm systems connected thereto, foam extinguishing systems or special hazard systems including water spray, foam, carbon dioxide or dry chemical systems, halon and other liquid or gas fire suppression systems, but does not include (A) any engineering design work connected with the layout of fire protection sprinkler systems, or (B) any work performed by employees of or contractors hired by a public water system, as defined in subsection (a) of section 25-33d;

(10) "State Fire Marshal" means the State Fire Marshal appointed by the Commissioner of Administrative Services;

(11) "Journeyman sprinkler fitter" means a specialized pipe fitter craftsman, experienced and skilled in the installation, alteration, maintenance and repair of fire protection sprinkler systems;

(12) "Irrigation work" means making the connections to and the inspection and testing of back flow prevention devices, and low voltage wiring, not exceeding twenty-four volts, used within a lawn sprinkler system;

(13) "Sheet metal work" means the onsite layout, installation, erection, replacement, repair or alteration, including, but not limited to, onsite testing and balancing of related life safety components, environmental air, heating, ventilating and air conditioning systems by manipulating, adjusting or controlling such systems for optimum balance performance of any duct work system, ferrous, nonferrous or other material for ductwork systems, components, devices, air louvers or accessories, in accordance with the State Building Code;

(14) "Journeyman sheet metal worker" means an experienced craftsman skilled in the installation, erection, replacement, repair or alteration of duct work systems, both ferrous and nonferrous;

(15) "Automotive glass work" means installing, maintaining or repairing fixed glass in motor vehicles;

(16) "Flat glass work" means installing, maintaining or repairing glass in residential or commercial structures;

(17) "Medical gas and vacuum systems work" means the work and practice, materials, instrumentation and fixtures used in the construction, installation, alteration, extension, removal, repair, maintenance, inspection, testing or renovation of gas and vacuum systems and equipment used solely to transport gases for medical purposes and to remove liquids, air-gases or solids from such systems;

(18) "Solar electricity work" means the installation, erection, repair, replacement, alteration, maintenance, inspection and testing of photovoltaic or wind generation equipment used to distribute or store ambient energy for heat, light, power or other purposes to a point immediately inside any structure or adjacent to an end use;

(19) "Active solar system" means a system that uses an external source of energy to power a motor-driven fan or pump to force the circulation of a fluid through solar heat collectors and which removes the sun's heat from the collectors and transports such heat to a location where it may be used or stored;

(20) "Passive solar system" means a system that is capable of collecting or storing the sun's energy as heat without the use of a motor-driven fan or pump;

(21) "Hybrid solar system" means a system that contains components of both an active solar system and a passive solar system;

(22) "Gas hearth product work" means the installation, service, inspection, testing or repair of a propane or natural gas fired fireplace, fireplace insert, stove or log set and associated venting and piping that simulates a flame of a solid fuel fire. "Gas hearth product work" does not include (A) fuel piping work, (B) the servicing of fuel piping, or (C) work associated with pressure regulating devices, except for appliances gas valves;

(23) "Millwright work" means the installation, repair, replacement, maintenance or alteration, including the inspection and testing, of (A) power generation machinery, or (B) industrial machinery, including the related interconnection of piping and tubing used in the manufacturing process, but does not include the performance of any action for which licensure is required under this chapter;

(24) "Inspection" means the examination of a system or portion of a system, involving the disassembly or removal of component parts of the system;

(25) "Testing" means to determine the status of a system as intended for its use, with or without the disassembly of component parts of the system, by the use of testing and measurement instruments;

(26) "Owner" means a person who owns or resides in a residential property and includes any agent thereof, including, but not limited to, a condominium association. An owner of a residential property is not required to reside in such residential property to be deemed an owner under this subdivision;

(27) "Person" means an individual, partnership, limited liability company or corporation; and

(28) "Residential property" means a single family dwelling, a multifamily dwelling consisting of not more than six units, or a unit, common element or limited common element in a condominium, as defined in section 47-68a, or in a common interest community, as defined in section 47-202, or any number of condominium units for which a condominium association acts as an agent for the unit owners.

Conn. Gen. Stat. § 20-330

(February, 1965, P.A. 493, S. 1; 1967, P.A. 789, S. 1; P.A. 74-341, S. 15, 16; P.A. 82-312, S. 3, 4; 82-439, S. 1, 7; 82-472, S. 89, 183; P.A. 83-426, S. 1; P.A. 87-588, S. 2, 8; P.A. 90-194, S. 1; P.A. 98-3, S. 23; P.A. 99-170, S. 1; 99-253, S. 1; P.A. 00-128, S. 1, 3; P.A. 02-27, S. 1; 02-92, S. 1; P.A. 03-83, S. 1, 2; P.A. 05-88, S. 1; 05-211, S. 1; P.A. 06-157, S. 2; P.A. 07-183, S. 1; P.A. 09-153, S. 3; Sept. Sp. Sess. P.A. 09-8, S. 31; P.A. 11-51, S. 93; P.A. 13-247, S. 200; P.A. 17-77, S. 10.)

Amended by P.A. 21-0037,S. 22 of the Connecticut Acts of the 2021 Regular Session, eff. 6/4/2021.

Amended by P.A. 19-0177,S. 9 of the Connecticut Acts of the 2019 Regular Session, eff. 10/1/2019.

Amended by P.A. 17-0077, S. 10 of the Connecticut Acts of the 2017 Regular Session, eff. 10/1/2017.

Amended by P.A. 11-0051, S. 93 of the the 2011 Regular Session, eff. 7/1/2011.

Amended by P.A. 09-0008, S. 31 of the Sept. 2009 Sp. Sess., eff. 10/5/2009.

Amended by P.A. 09-0153, S. 3 of the the 2009 Regular Session, eff. 10/1/2009.

Cited. 209 C. 719. Cited. 3 Conn.App. 707; 12 CA 251; 34 CA 123.

See Sec. 20-334a re types of licenses. See Sec. 29-291 re appointment of State Fire Marshal.