Current with changes from the 2024 legislative session through ch. 845
Section 45.2-532 - Surface foreman certificationA. An applicant for a surface foreman certificate shall be at least 23 years of age and have had at least five years of experience in a coal mine, at least three years of which shall have been in a surface coal mine. A graduate of an approved course in mining engineering at a baccalaureate institution of higher education shall be given credit for three of the five years of practical experience required. An applicant who possesses a degree in mining technology shall be given credit for two of the five years of required practical experience. Each applicant shall demonstrate to the Board of Coal Mining Examiners a thorough knowledge of the theory and practice of surface coal mining by making 85 percent or more on the written examination. In addition, each applicant shall pass the examination in gas detection. The holder of a surface foreman certificate issued by the Board shall be authorized to act as surface foreman at any surface coal mine.B. Each candidate for certification as a surface foreman shall complete, at a minimum, a 24-hour course of instruction in advanced first aid taught by a certified advanced first aid instructor in accordance with subsection A of § 45.2-579 and pass an examination relating thereto approved by the Board. No course or examination shall be required of a candidate holding a current higher level of emergency medical certification from the State Department of Health.Code 1950, §§ 45-23, 45-28; 1954, c. 191; 1966, c. 594, § 45.1-12; 1972, c. 784; 1978, c. 729; 1980, c. 442; 1984, c. 237; 1994, c. 28, § 45.1-161.39; 2007, cc. 894, 914; 2010, cc. 809, 857; 2021, Sp. Sess. I, c. 387.