Section 25250.60 - Criteria for testing and marking brake friction materials and certification procedures(a) The department shall consult with the brake friction materials manufacturing industry in the development of all criteria for testing and marking brake friction materials and adopting certification procedures for brake friction materials, as required pursuant to this article. The mark of proof of certification on brake friction materials shall identify the brake friction material manufacturer, be easily applied, be easily legible, and not impose unreasonable additional costs on manufacturers due to the use of additional equipment or other factors.(b) On and after January 1, 2014, any new motor vehicle offered for sale in the state shall be equipped with brake friction materials that comply with of Section 25250.51.(c)(1) On and after January 1, 2014, a manufacturer of vehicle brake friction materials used in brakes on new motor vehicles or as replacement parts that are sold in the state shall certify compliance declaring that its formulation for brake friction materials complies with Section 25250.51.(2) A vehicle brake friction material manufacturer shall mark proof of certification pursuant to this subdivision on all brake friction materials.(d) On and after January 1, 2021, any new motor vehicle offered for sale in the state shall be equipped with brake friction materials that comply with Section 25250.52.(e)(1) On and after January 1, 2021, a manufacturer of vehicle brake friction materials used in brakes on new motor vehicles or as replacement parts for those vehicles that are sold in the state shall certify compliance declaring that its formulation for brake friction materials complies with Section 25250.52.(2) A vehicle brake friction material manufacturer shall mark proof of certification with this subdivision on all brake friction materials.(f) On and after January 1, 2025, any new motor vehicle offered for sale in the state shall be equipped with brake friction materials that comply with Section 25250.53.(g)(1) On and after January 1, 2025, a manufacturer of vehicle brake friction materials used in brakes on new motor vehicles or as replacement parts for those vehicles that are sold in the state shall certify compliance declaring that its formulation for brake friction materials complies with Section 25250.53.(2) A vehicle brake friction material manufacturer shall mark proof of certification with this subdivision on all brake friction materials.(h) Prior to offering brake friction materials for sale in this state, a manufacturer of vehicle brake friction materials shall file a copy of the certification for each of its brake friction materials formulations with a testing certification agency. Each certification shall be made available within a reasonable period of time on the testing certification agency's Internet Web site at no cost to the department and to the public, and shall serve as official registration of certification for compliance with this section.(i) A manufacturer of vehicle brake friction materials may obtain from a testing certification agency a certification of compliance with the requirements of Section 25250.51, 25250.52, or 25250.53 at any time prior to the dates specified in those sections.(j) The certification and mark of proof required pursuant to this section shall show a consistent date format, designation, and labeling to facilitate acceptance in all 50 states and United States territories for purposes of demonstrating compliance with all applicable requirements.Ca. Health and Saf. Code § 25250.60
Added by Stats 2010 ch 307 (SB 346),s 2, eff. 1/1/2011.