Section 13450 - Specifications for compression-ignition engine fuel, kerosene, and fuel oilThe department shall establish specifications for compression-ignition engine fuel, kerosene, and fuel oil. The department shall adopt by reference the latest standards established by a recognized consensus organization or standards writing organization such as the ASTM International or the SAE International, for compression-ignition engine fuels, kerosene, and fuel oil, except that no specification shall be less stringent than required by any California state law.
(a) Diesel fuel oil and renewable diesel fuel oil shall meet the specifications set forth in ASTM International Standard Specification D975.(b) Kerosene shall meet the specifications set forth in ASTM International Standard Specification D3699.(c) Fuel oil shall meet the specifications set forth in ASTM International Standard Specification D396.(d) Biodiesel blends shall meet the latest specifications set forth in ASTM International Standard Specification D7467.(e) Dimethyl ether used as a motor vehicle fuel shall meet the latest specifications set forth in ASTM International Standard Specification D7901.(f) Renewable diesel fuel shall meet the specifications set forth in ASTM International Standard Specification D975.Ca. Bus. and Prof'l. Code § 13450
Amended by Stats 2015 ch 591 (AB 808),s 23, eff. 1/1/2016.Article heading amended by Stats 2015 ch 591 (AB 808),s 22, eff. 1/1/2016.Amended by Stats 2012 ch 661 (SB 1576),s 53, eff. 1/1/2013.