Statutes, codes, and regulations
Wyoming Administrative Code
Agency 053 - Workforce Services, Department ofSubagency 0004 - Mining InspectorChapter 5 - SURFACE COAL MINES
Subpart H - Grounding
Section 77.701-2 - Approved methods of grounding metallic frames, casings, and other enclosures of electric equipment receiving power from a direct-current power system

053-5 Wyo. Code R. § 77.701-2

Download
PDF
Current through April 27, 2019
Section 77.701-2 - Approved methods of grounding metallic frames, casings, and other enclosures of electric equipment receiving power from a direct-current power system

(a) The following methods of grounding metallic frames, casings, and other enclosures of electric equipment receiving power from a direct-current power system with one polarity grounded will be approved:

  • (1) A solid connection to the grounded power conductor of the system; and,
  • (2) Any other method, approved by an authorized representative of the Secretary, which insures that there is no difference in potential between such metal enclosures and the earth.

(b) A method of grounding of metallic frames, casings, and other enclosures of electric equipment receiving power from a direct-current power system other than a system with one polarity grounded, will be approved by an authorized representative of the Secretary if the method insures that there is no difference in potential between such frames, casings, and other enclosures, and the earth.

053-5 Wyo. Code R. § 77.701-2