053-3 Wyo. Code R. § 57.5050
(a) No employee shall be permitted an exposure to noise in excess of that specified in the table below. Noise level measurements shall be made using a sound level meter meeting specifications for type 2 meters contained in American National Standards Institute (ANSI) Standard S1.4-1971, "General Purpose Sound Level Meters," approved April 27, 1971, which is hereby incorporated by reference and made a part hereof, or by a dosimeter with similar accuracy. This publication may be obtained from the American National Standards Institute, Inc., 1430 Broadway, New York, New York 10018, or may be examined in any Metal and Nonmetal Mine Health and Safety District or Subdistrict Office of the Mine Safety and Health Administration.
PERMISSIBLE NOISE EXPOSURES
| Duration per day, hours of exposure | Sound level dBA, slow response |
| 8 | 90 |
| 6 | 92 |
| 4 | 95 |
| 3 | 97 |
| 2 | 100 |
| 1 1/2 | 102 |
| 1 | 105 |
| 1/2 | 110 |
| 1/4 or less | 115 |
No exposure shall exceed 115 dBA. Impact or impulsive noises shall not exceed 140 dB, peak sound pressure level.
Note: When the daily noise exposure is composed of two or more periods of noise exposure at different levels, their combined effect shall be considered rather than the individual effect on each.
If the sum
(C1/T1)+(C2/T2)+ . . . (Cn/Tn)
exceeds unity, then the mixed exposure shall be considered to exceed the permissible exposure. Cn indicates the total time of exposure at a specified noise level, and Tn indicates the total time of exposure permitted at that level. Interpolation between tabulated values may be determined by the following formula:
Log T = 6.322-0.0602 SL
Where T is the time in hours and SL is the sound level in dBA.
053-3 Wyo. Code R. § 57.5050