Subpart R - Personnel Hoisting

Section 56.19000 - Application
Section 56.19001 - Rated capacities
Section 56.19002 - Anchoring
Section 56.19003 - Driving mechanism connections
Section 56.19004 - Brakes
Section 56.19005 - Locking mechanism for clutch
Section 56.19006 - Automatic hoist braking devices
Section 56.19007 - Overtravel and overspeed devices
Section 56.19008 - Friction hoist synchronizing mechanisms
Section 56.19009 - Position indicator
Section 56.19010 - Location of hoist controls
Section 56.19011 - Drum flanges
Section 56.19012 - Grooved drums
Section 56.19013 - Diesel- and other fuel-injection-powered hoists
Section 56.19014 - Friction hoist overtravel protection
Section 56.19017 - Emergency braking for electric hoists
Section 56.19018 - Overtravel by-pass switches
Section 56.19021 - Minimum rope strength
Section 56.19022 - Initial measurement
Section 56.19023 - Examinations
Section 56.19024 - Retirement criteria
Section 56.19025 - Load end attachments
Section 56.19026 - Drum end attachment
Section 56.19027 - End attachment retermination
Section 56.19028 - End attachment replacement
Section 56.19030 - Safety device attachments
Section 56.19035 - Headframe design
Section 56.19036 - Headframe height
Section 56.19037 - Fleet angles
Section 56.19038 - Platforms around elevated head sheaves
Section 56.19045 - Metal bonnets
Section 56.19049 - Hoisting persons in buckets
Section 56.19050 - Bucket requirements
Section 56.19054 - Rope guides
Section 56.19055 - Availability of hoist operator for manual hoists
Section 56.19056 - Availability of hoist operator for automatic hoists
Section 56.19057 - Hoist operator's physical fitness
Section 56.19058 - Experienced hoist operators
Section 56.19061 - Maximum hoisting speeds
Section 56.19062 - Maximum acceleration and deceleration
Section 56.19063 - Persons allowed in hoist room
Section 56.19065 - Lowering conveyances by the brakes
Section 56.19066 - Maximum riders in a conveyance
Section 56.19067 - Trips during shift changes
Section 56.19068 - Orderly conduct in conveyances
Section 56.19069 - Entering and leaving conveyances
Section 56.19070 - Closing cage doors or gates
Section 56.19071 - Riding in skips or buckets
Section 56.19072 - Skips and cages in same compartment
Section 56.19073 - Hoisting during shift changes
Section 56.19074 - Riding the bail, rim, bonnet, or crosshead
Section 56.19075 - Use of open hooks
Section 56.19076 - Maximum speeds for hoisting persons in buckets
Section 56.19077 - Lowering buckets
Section 56.19078 - Hoisting buckets from the shaft bottom
Section 56.19079 - Blocking mine cars
Section 56.19080 - Hoisting tools, timbers, and other materials
Section 56.19081 - Conveyances not in use
Section 56.19083 - Overtravel backout device
Section 56.19090 - Dual signaling systems
Section 56.19091 - Signaling instructions to hoist operator
Section 56.19092 - Signaling from conveyances
Section 56.19093 - Standard signal code
Section 56.19094 - Posting signal code
Section 56.19095 - Location of signal devices
Section 56.19096 - Familiarity with signal code
Section 56.19100 - Shaft landing gates
Section 56.19101 - Stopblocks and derail switches
Section 56.19102 - Shaft guides
Section 56.19103 - Dumping facilities and loading pockets
Section 56.19104 - Clearance at shaft stations
Section 56.19105 - Landings with more than one shaft entrance
Section 56.19106 - Shaft sets
Section 56.19107 - Precautions for work in compartment affected by hoisting operation
Section 56.19108 - Posting warning signs during shaft work
Section 56.19109 - Shaft inspection and repair
Section 56.19110 - Overhead protection for shaft deepening work
Section 56.19111 - Shaft-sinking ladders
Section 56.19120 - Procedures for inspection, testing, and maintenance
Section 56.19121 - Recordkeeping
Section 56.19122 - Replacement parts
Section 56.19129 - Examinations and tests at beginning of shift
Section 56.19130 - Conveyance shaft test
Section 56.19131 - Hoist conveyance connections
Section 56.19132 - Safety catches
Section 56.19133 - Shaft
Section 56.19134 - Sheaves
Section 56.19135 - Rollers in inclined shafts